DVX 400 likes to idle at 6000 rpms!!!!

[clancooler]

today i went to ride my bike around the yard and it kept stalling, so i took the carb apart and found it was jet that was clogged so i sprayed some carb cleaner in it and cleared it. i put everything back together and fired it up and it started. except instead of idleing at the normal 1600 rpms, it idles at 6000rpms. i tried to adjust the idle, and nothing affected the rpms. what are some leads, i know to check the cables and etc.

[bluesman]

the throttle cable is pinched...... keeping  the carb open

[atvtrailer]

it's not the cable, he has checked the cable and its working fine, and it's not held open, it's closed when its supose to be, so it's not the throttle

[Hollywood]

Only time I had that happen it was just what bluesman said the throttle was adjusted to tight. If it's not that then I can't imagine what it could be. I know you say you checked the throttle but have you tried backing it off a few turns. It's not always something that can be seen with the eyes, doesn't take much.

[clancooler]

tonight i cant do much since the neighbors dont appreciate my bike, let alone it idleing 6000 rpms while i mess around with cables, and etc.

bluesman i got the pm, i will call you tommorow if i cant figure it out.

Most likely i will go over atvtrailers place tommorow if hes not doing anything and see whats going on.

Thanks hollywood, i will keep you up to date on what i try, and narrow it down some more.

[svtbolt04]

6000rpms is crazy... Check your CDI. (unplug then plug)

[clancooler]

its not my carb i took it apart and took checked all my cables,choke, jets and float, needle, etc!!! its got to be the cdi!! now i have to test it and dont know where to do that, or know anyone with a z400, kfx, or dvx.

[bluesman]

DONT DO ANYTHING TO YOU CALL ME AFTER 5:30 TONIGHT
 
 JUST RELAX

[clancooler]

the plug is black meaning its burning rich.    my guess still is the cdi.

[Nightbreed]

get with bluesman, or call us at the shop.

There is no way to my knowledge that a CDI could ever cause that problem.

[MAV400]

Did you check your Choke lever?

[clancooler]

the choke lever is fine, when i turn it on the rpms increase, and off they decrease, i aggree now that its not the cdi.

[bluesman]

JUST RELAX MAN.......

[clancooler]

fixed it, thanks for all your help!

The cable was too short, and couldnt lengthen it any longer, so me and atvtrailer rigged something up (thanks to Mr. JB Weld).