RAPTOR 350, wut aftermarket parts should i get

[raptorboy954]

i got my raptor 350 a couple of months ago and am looking around for aftermarket parts to get some more power into it. anyone can help i would really appreciate it. thanks

[53yfz450]

hmf pipe,lonestar +2 a arms,lonestar axle,itp mxr4 tires,new air filter system,and if you want more power edlebrock make a carb

[raptorboy954]

i was looking into putting a jet kit  good or bad idea?

[VelociRaptor350]

Yeah man a jet kit is a good idea if your planning on modding a little at a time, so you always have another jet to go to.  I got the DYNOJET stage 1/2 kit and it worked out for me.  For a pipe i'd just get a slip on and save your money, changing the stock headpipe won't really do much, its too big from the factory, the only thing it will do is make it shiney.  HMF slip on's run around 200 bucks for the aluminum version, and 220 for a powdercoated can.  Don't waste your money on a stock replacement filter, they all blow, get a pro design intake with the adapter plate that your attatch to your airbox.  The stock rear tires have decent bite but weak sidewalls, you'll feel it when cornering, not as bad when you extend the axle. I have a durablue 2+2, it was 290 from rockymountain atv, had no problems with it.

[VelociRaptor350]

Oh i forgot to add an oil cooler would be a good idea to help keep the clutch plates cool, look up a parts listing on a 95 big bear, you'll see it has the same motor and had an oil cooler, you order the parts and buy a small tranny cooler and mount it up, helps alot with just an air cooled motor.

[raptorboy954]

thanks alot man. right now i dont know wut to get first. im limited with money since im probably gonna pay for it with my own money :-/  anyways were do u ride and do u live close to broward. later

[VelociRaptor350]

Im in jersey now bud, ill be in pinellas park at the end of march.  If you want a little extra something when its stock you can get a 12 tooth front sprocket, you can pick one up for around 10-15 bucks and it'll give you more bottom end for trails and stuff, once you get some mods you can always throw the stock 13 back on to get your top speed back.

[raptorboy954]

wut exactly does a jet kit do? wut other parts are a bang for the buck thanks again

[VelociRaptor350]

a jet kit consists of new jet,s a new needle, and slide spring. One your atv, when you add performance parts like a air filter or pipe, you let more air into the motor, what the jet kit does it add more fuel so you can keep the same ratiot of air/fuel in your motor.  If you add a filter and don't jet for it, the mixture becomes to lean and you can break your motor, you need to have that right ratio to keep things safe and to make more power. Like i said, get an intake, a pipe,jet kit, and that sprocket, you'll be very happy with the new und power

[raptorboy954]

thanks alot man. can i put the jet kit in myself or do i have to send it to someplace?

[VelociRaptor350]

You can do it yourself, its not hard to change a jet, its a little annoying when you have to keep doing it to get it right but i have jet chenges down to like 5 minutes.  Expect to spend like 45 minutes to an hour the first time changing the needle and all that other good stuff.

[raptorboy954]

sounds good. whenever u are in town i would love to ride wit another raptor 350 so keep in touch. thanks alot

[raptorboy954]

from first to last, wich part should i get first??

[raptorboy954]

fmf powercore 4 or hmf??

[53yfz450]

H M F !!!!!!!!!!!!!

[raptorboy954]

is it way better or wut

[1slowfox]

Get the new issue of atvsport there is a big write up on the rappy350 ..  That duncan Racing  did !

ED

[raptorboy954]

for real thats cool il have to check it out

raptorboy

[raptorboy954]

how about the dmc alien exhaust

raptorboy

[53yfz450]

doesent give you as much power as the hmf

[raptorboy954]

oh ok. i just saw that it was REALLY cheap so i was interested. do u have the hmf? wut else do u have on ur rappy

raptorboy

[53yfz450]

HSD RACING:
a-rms=long travel(+5),
elka quadruple rate with remote res.,
lonestar steering stem,
parking brake block-off plate,
brake lines(red)
brakeline clamps(red)


Hiper Technology Wheels
10x9-3+6 carbon fiber rear,(2),
10x5-3+2,carbon fiber front,(2),


ITP Holeshot Tires
18x10x9 MXR4 rear
20x6x10 MX front,

HMF Exhaust
slip-on muffler,

Proflow uni intake
Pro Flow Uni Intake System

durablue
eleminator axle

so far thats what i ordered it should be here in a couple of weeks ill post some pics

[raptorboy954]

u ordered all that at once???  that must have been a pretty big tag. well how much is the intake system??

raptorboy

[VelociRaptor350]

Around 80 bucks, your gonna have to jet for it.

[raptorboy954]

yea i have the jets all im missing is the exhaust and maybe the intake. do u have aim. if u do my sn is thedan787 if u wanna chat.

raptorboy