Water 4 Gas

[big-daddy]

suzukitrash, You need get a 22k resistor from radio shack, PM me when you have it.

[suzukitrash]

I will pick it up teusday. Do I just need 1 ?

[big-daddy]

them come in a pack of 6 for 99 cent. yes, you will only need one.

[suzukitrash]

Figures I looked around the house and have 220 and 2.2K but no 22K

[zobel929]

i have a 2003 f350 super duty diesel.  I am going to get a map sensor and a map sensor enhancer.  4 o2 extenders and a 3 pack from water for gas specs.  Will i get a big mpg gain and also i heard that its 2 stage injection will that effect any thing?

[suzukitrash]

Went through a tank of gas without the resistor and no mileage increase or anything. Next I will try the resistor on the maf and post any results.

[big-daddy]

i have a 2003 f350 super duty diesel.  I am going to get a map sensor and a map sensor enhancer.  4 o2 extenders and a 3 pack from water for gas specs.  Will i get a big mpg gain and also i heard that its 2 stage injection will that effect any thing?

Good luck in finding those oxygen sensors on a pre 2008 diesel engine.

[zobel929]

why good luck finding those oxygen sensors? do they not have any or are they really hidden?

[ROC0999]

since hooking up my 2nd unit to my 3.0 v6 ford ranger w/5speed I m doing like 28-29 mpg now , I also added 2 stainless steel plates to both units and that helped considerably, before the hho I got like 17-18mpg then after 1 hho I got 25-26 and w2 units its doing great

[jrpro130]

since hooking up my 2nd unit to my 3.8 v6 ford ranger w/5speed I m doing like 28-29 mpg now , I also added 2 stainless steel plates to both units and that helped considerably, before the hho I got like 17-18mpg then after 1 hho I got 25-26 and w2 units its doing great

Do you mean 4.0 or 3.0 ranger or did you swap a diff motor? JW since I got a ranger myself I'm pretty into rangers...

[yunt2ride]

since hooking up my 2nd unit to my 3.8 v6 ford ranger w/5speed I m doing like 28-29 mpg now , I also added 2 stainless steel plates to both units and that helped considerably, before the hho I got like 17-18mpg then after 1 hho I got 25-26 and w2 units its doing great

Do you mean 4.0 or 3.0 ranger or did you swap a diff motor? JW since I got a ranger myself I'm pretty into rangers...

Ford actually made two V6 engines for the ranger. A 3.0 and a 4.0

[big-daddy]

why good luck finding those oxygen sensors? do they not have any or are they really hidden?

Diesel don't not have oxygen sensors before 2008

[zobel929]

how do you know that?  a mechanic told me that it did.  but maby he thought i said gas? are you sure about that?

[TRX450R_Racer]

how do you know that?  a mechanic told me that it did.  but maby he thought i said gas? are you sure about that?

Big D is right............mechanic is wrong.

[dynodon]

My mechanic showed me his on a bronco II, He said that he is getting about 8-9 mpg better( city driving) than before the water for gas, But he was going to tune it a little more to see if it gets better.
They were also installing one on a 07` dodge diesel tonight. If I hear any results I`ll post them.

[zobel929]

SO then i don't need to get a map sensor and a map sensor enhancer?  what do i need besides the hho generator?

[jrpro130]

since hooking up my 2nd unit to my 3.8 v6 ford ranger w/5speed I m doing like 28-29 mpg now , I also added 2 stainless steel plates to both units and that helped considerably, before the hho I got like 17-18mpg then after 1 hho I got 25-26 and w2 units its doing great

Do you mean 4.0 or 3.0 ranger or did you swap a diff motor? JW since I got a ranger myself I'm pretty into rangers...

Ford actually made two V6 engines for the ranger. A 3.0 and a 4.0

I know

I own a 3.0.  I know quite a bit about rangers...

They also made two versions of the 4.0, 2 versions of the 2.3, a 2.5, a diesel, 3.0 flex fuel, 3.0 non flex...what else you wanna know

And a transmission for every kind...4.0 and 2.3 use same transmission, 3.0 uses its own (both auto and manual), they only made 2 different tcases, auto/manual bw3051 IIRC...I may be wrong though

I was just wondering what kind of 3.8...seeing as I don't recall a 3.8 being stock...unless he has a 4.0 and is counting the ACTUAL size

[ROC0999]

NOPE JUST TYPED THE WRONG SIZE IT IS A 3.0

[big-daddy]

Update F150 when from 14.4 to 19.6 MPG and soon 20+ 

[yunt2ride]

Update F150 when from 14.4 to 19.6 MPG and soon 20+ 

Nice

[yunt2ride]

bump

[Jons]

We downloaded the books from http://www.water4gasdownloads.com site. We are still in the reading faze, must say that the diy conversion looks much harder than stated on the main page, it would be great to here about actual mileage improvements from other Water4Gas members.

[zobel929]

hey guys i just installed a 3 cell water4gas arrangement in my truck i had it in a parallel design and i blew the 10 amp fuse right away but was making a okay amount of hho.  now they are all in a series and it is working with a 10 amp fuse but is barely making hho at all.  How do you suggest i wire this?

[TRX450R_Racer]

hey guys i just installed a 3 cell water4gas arrangement in my truck i had it in a parallel design and i blew the 10 amp fuse right away but was making a okay amount of hho.  now they are all in a series and it is working with a 10 amp fuse but is barely making hho at all.  How do you suggest i wire this?

Do you have baking soda in the jars?

[DocMurphy]

hey guys i just installed a 3 cell water4gas arrangement in my truck i had it in a parallel design and i blew the 10 amp fuse right away but was making a okay amount of hho.  now they are all in a series and it is working with a 10 amp fuse but is barely making hho at all.  How do you suggest i wire this?

ZOBEL the more baking soda you put in the more amps it will draw, you need to have an AMP meter in line from the battery to generator to set the proper electrolyte levels, example: start with straight distilled water then add a 1/4 teaspoon  to each bottle and let it mix a bit then watch for it to raise the AMP's.
Once you hit's 15 AMP's don't put any more soda in, If it goes over 15 amps just pour off some water and add new water to dilute it.
If you really want to use a good electrolyte go to Home Depot and get some Lye or buy some KOH from some online store https://www.saltcitysoapworks.com/store/store.php cause it makes the most and best gas.
I have wired the bottles in series and parallel so no matter water way you do it it will work, I did find that if you put then in parallel they produce much more gas .