Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
ATV Florida Forum
>
General
>
Open Discussion
>
Trailer Estimation
Pages: [
1
]
2
All
Go Down
« previous
next »
Print
Author
Topic: Trailer Estimation (Read 7803 times)
Young Gun
Supreme Member
Offline
Location: Hernando
Posts: 1651
Murray Enterprises
Trailer Estimation
«
on:
January 01, 2007, 06:41:39 PM »
Yes, I am annoying with all the topics I make about opinions but hey im just trying to get it right. Here is a list of the quads we are indefinitely buying...
Suzuki Kingquad 700
Suzuki Vinson
Suzuki Ozark (could change to a Z250)
Suzuki LTR450
Yamaha Rhino (if/when the 700 comes out)
Now time for the question, what size trailer do you guys think we need? We originally were going to go enclosed but decided not to because my dad had a chance to drive one and did not like it for some reason. So now were going open. I was thinking a 18ft trailer would be good?
The biggest problem is if we get the rhino we need to make sure we have room longways because theres no chance in heck its going sideways. I know we could have the 4 quads go sideways.
«
Last Edit: January 01, 2007, 06:44:10 PM by SuzukiRacer
»
Logged
2008 KFX450R
Full DASA Exhaust, FCI, Dynojet PC5, Hiper CF1 Beadlocks, ITP GNCC Holeshots, IMS Roll Bumper, ProArmor FAT Peg Nerfbars, Red Radiator hoses, Engine ICE Coolant, Spider Grips, Blingster Rear Grab Bar
2004 TRX450R
Too much to list...
Silverstar
Junior Member
Offline
Location: Salt Springs, FL
Posts: 44
Sportin' a Vinson!!
Re: Trailer Estimation
«
Reply #1 on:
January 01, 2007, 06:56:59 PM »
I'm not sure but it'll need to be HUGE!!!! And you'd better have one nasty diesel to pull it! An enclosed big enough to haul all that would cost as much as a small house.
Logged
04 Suzuki Vinson 500 manual tranny. 25" mudzillas, snorkeled. Still have my samurai for sale.
Young Gun
Supreme Member
Offline
Location: Hernando
Posts: 1651
Murray Enterprises
Re: Trailer Estimation
«
Reply #2 on:
January 01, 2007, 07:06:43 PM »
Quote from: Silverstar on January 01, 2007, 06:56:59 PM
I'm not sure but it'll need to be HUGE!!!! And you'd better have one nasty diesel to pull it! An enclosed big enough to haul all that would cost as much as a small house.
I talked to a guy on here that is selling a 24ft enclosed trailer and he fit two vinsons in sidexside. He said there is room for two more of them sideways up front. And that only took up half the trailer
. Oh and I think your thinking about a toy hauler. You can get a brand new 24ft for around 10k.
Logged
2008 KFX450R
Full DASA Exhaust, FCI, Dynojet PC5, Hiper CF1 Beadlocks, ITP GNCC Holeshots, IMS Roll Bumper, ProArmor FAT Peg Nerfbars, Red Radiator hoses, Engine ICE Coolant, Spider Grips, Blingster Rear Grab Bar
2004 TRX450R
Too much to list...
Gato
Supreme Member
Offline
Location: Hialeah,Fl
Posts: 917
Re: Trailer Estimation
«
Reply #3 on:
January 01, 2007, 07:08:26 PM »
I would go with 20ft you will not regret it 2ft goes a long way for storage
Logged
2008 Yamaha Rhino 700FI(camo)
2002 Arctic Cat 400i 4x4
2010 Arctic CAt 700 h1
Young Gun
Supreme Member
Offline
Location: Hernando
Posts: 1651
Murray Enterprises
Re: Trailer Estimation
«
Reply #4 on:
January 01, 2007, 07:10:12 PM »
Quote from: articcat on January 01, 2007, 07:08:26 PM
I would go with 20ft you will not regret it 2ft goes a long way for storage
Well we werent too worried about storage because the back of the hauler would be empty and thought that would be enough lol. Then again who knows
Logged
2008 KFX450R
Full DASA Exhaust, FCI, Dynojet PC5, Hiper CF1 Beadlocks, ITP GNCC Holeshots, IMS Roll Bumper, ProArmor FAT Peg Nerfbars, Red Radiator hoses, Engine ICE Coolant, Spider Grips, Blingster Rear Grab Bar
2004 TRX450R
Too much to list...
qt314nfla
Guest
Re: Trailer Estimation
«
Reply #5 on:
January 01, 2007, 07:16:11 PM »
You'll be hard pressed to even find a hauler that will hold that many toys. BBF had a weekend warrior that's the biggest I've seen and it might hold them. It may be for sale.
As for a trailer my suggestion is a very large 5th wheel trailer. Get one that's wide enough that you can load them either sideways on the trailer or two up across the width.
Either way I hope you're parents have a huge diesel. You're not going to tow it all safely w/o one. If you need one talk to SwampDonkey w/ Heartland motors on this site.
Another way to see what you need is to look up the specs on each of the vehicles you are wanting and add the width and lengths.
Logged
Young Gun
Supreme Member
Offline
Location: Hernando
Posts: 1651
Murray Enterprises
Re: Trailer Estimation
«
Reply #6 on:
January 01, 2007, 07:18:30 PM »
Quote from: QT314 on January 01, 2007, 07:16:11 PM
You'll be hard pressed to even find a hauler that will hold that many toys. BBF had a weekend warrior that's the biggest I've seen and it might hold them. It may be for sale.
As for a trailer my suggestion is a very large 5th wheel trailer. Get one that's wide enough that you can load them either sideways on the trailer or two up across the width.
Either way I hope you're parents have a huge diesel. You're not going to tow it all safely w/o one. If you need one talk to SwampDonkey w/ Heartland motors on this site.
Were talking about just a regular enclosed cargo trailer, not a toy hauler that you can sleep in lol. I think ive confused you all. Im talking about this kind of trailer... which is not what we want to get haha. Maybe ill pressure my dad into it?
And yes QT, we have already contacted Scott
«
Last Edit: January 01, 2007, 07:21:25 PM by SuzukiRacer
»
Logged
2008 KFX450R
Full DASA Exhaust, FCI, Dynojet PC5, Hiper CF1 Beadlocks, ITP GNCC Holeshots, IMS Roll Bumper, ProArmor FAT Peg Nerfbars, Red Radiator hoses, Engine ICE Coolant, Spider Grips, Blingster Rear Grab Bar
2004 TRX450R
Too much to list...
qt314nfla
Guest
Re: Trailer Estimation
«
Reply #7 on:
January 01, 2007, 07:20:30 PM »
Good luck. You can get a rhino in them but you'll have to deflate the tires to fit it due to height. There's a couple ppl on this site. I still think that trailers gonna be too small. Do some math and add up the toy specs and you'll have all the info you need. You'll still need a good size diesel to tow something like that safely.
You'll probably need a triple axle for all those toys.
Logged
Young Gun
Supreme Member
Offline
Location: Hernando
Posts: 1651
Murray Enterprises
Re: Trailer Estimation
«
Reply #8 on:
January 01, 2007, 07:24:05 PM »
Quote from: QT314 on January 01, 2007, 07:20:30 PM
Good luck. You can get a rhino in them but you'll have to deflate the tires to fit it due to height. There's a couple ppl on this site. I still think that trailers gonna be too small. Do some math and add up the toy specs and you'll have all the info you need. You'll still need a good size diesel to tow something like that safely.
You'll probably need a triple axle for all those toys.
yeah thats another reason we wanted to go open because of the height issue. Thats a good idea to look at the specs lol, overlooked that I guess
. Scott is helping us find a good deal on a diesel. And good god at the triple axle. I coudlve sworn a double would be enough. Now remember there is four in our family, so some toys might not be taken on ride, probably one will be left back and that will most likely be the rhino since we will head to croom alot. When we go to Ocala my mom and sister will leave the quads and use the Rhino. Its confusing but oh well lol.
Logged
2008 KFX450R
Full DASA Exhaust, FCI, Dynojet PC5, Hiper CF1 Beadlocks, ITP GNCC Holeshots, IMS Roll Bumper, ProArmor FAT Peg Nerfbars, Red Radiator hoses, Engine ICE Coolant, Spider Grips, Blingster Rear Grab Bar
2004 TRX450R
Too much to list...
qt314nfla
Guest
Re: Trailer Estimation
«
Reply #9 on:
January 01, 2007, 07:28:38 PM »
Ok then you should be fine w/ a tandem axle. As long as you aren't taking the whole lot of them.
Logged
Young Gun
Supreme Member
Offline
Location: Hernando
Posts: 1651
Murray Enterprises
Re: Trailer Estimation
«
Reply #10 on:
January 01, 2007, 07:30:40 PM »
Quote from: QT314 on January 01, 2007, 07:28:38 PM
Ok then you should be fine w/ a tandem axle. As long as you aren't taking the whole lot of them.
Oh no, definetly not lol. Out of anything....
Croom: All 4 quads, no rhino
Ocala: Kingquad, LTR, Rhino.
Logged
2008 KFX450R
Full DASA Exhaust, FCI, Dynojet PC5, Hiper CF1 Beadlocks, ITP GNCC Holeshots, IMS Roll Bumper, ProArmor FAT Peg Nerfbars, Red Radiator hoses, Engine ICE Coolant, Spider Grips, Blingster Rear Grab Bar
2004 TRX450R
Too much to list...
Muddbuggy
Supreme Member
Offline
Location: sarasota,Fl
Posts: 782
Re: Trailer Estimation
«
Reply #11 on:
January 01, 2007, 07:37:46 PM »
I have a 20ft enclosed with with cabinets and a frig up front which leaves me 18 foot of floor space. I can get two quads sideXside up front and a Rhino in the back and a geni or four quads. the rhino is 9ft long and a quad is about 5-6ft it sounds like alotta extra space but dont forget you still need space for tie downs and to climb over or around stuff.
QT I dont have to deflate the tires on aaron's rhino to get it in I still have 2-3in clearance on the roof.
MB
Logged
GOTTA HORNEY RHINO....06' CAMO
07' OZARK 250
05' Z250
05' Z400 ACnerfs/beadlocks/carbon fiber Yoshi
SEABEEJIM IS A CLOWN PUNCHER.....
qt314nfla
Guest
Re: Trailer Estimation
«
Reply #12 on:
January 01, 2007, 07:39:01 PM »
Quote from: Muddbuggy on January 01, 2007, 07:37:46 PM
I have a 20ft enclosed with with cabinets and a frig up front which leaves me 18 foot of floor space. I can get two quads sideXside up front and a Rhino in the back and a geni or four quads. the rhino is 9ft long and a quad is about 5-6ft it sounds like alotta extra space but dont forget you still need space for tie downs and to climb over or around stuff.
QT I dont have to deflate the tires on aaron's rhino to get it in I still have 2-3in clearance on the roof.
MB
Chillin has to deflate tires for it to fit in his trailer. Good to know that's not always the case though.
Logged
GSXR1000
Full Member
Offline
Location: In the Dog House!!!
Posts: 236
YFZ 450R
Re: Trailer Estimation
«
Reply #13 on:
January 01, 2007, 07:39:49 PM »
I have a 20 ft enclosed and I can fit a rhino and 3 quads in there with gear no problem. maybe 4 quads if we packed them in there tight.
good luck with your choice
Logged
Bigscrb15
Supreme Member
Offline
Location: Port Charlotte FL
Posts: 2886
I'm a Florida Mud Rider
Re: Trailer Estimation
«
Reply #14 on:
January 01, 2007, 08:08:33 PM »
Quote from: QT314 on January 01, 2007, 07:16:11 PM
You'll be hard pressed to even find a hauler that will hold that many toys. BBF had a weekend warrior that's the biggest I've seen and it might hold them.
Our hauler has about the same amount of storage area and there is no way that many quads would fit.
You would be best off going with a 24' open trailer. We have a 16' trailer and can get 2Vinsons 1Wolverine and a Recon all sideways.
Logged
"When once you have tasted flight, you will forever walk the earth with your eyes turned skyward, for there you have been, and there you will always long to return."
eldiablo64
Supreme Member
Offline
Location: St pete,Pinellas
Posts: 822
Finally! ATVFlorida.com is here!
Re: Trailer Estimation
«
Reply #15 on:
January 01, 2007, 08:21:01 PM »
you could go sideways with the rhino just put a side ramp on it.I've seen a couple trailers like that
Logged
TAKE IT OUT AND PLAY WITH IT AT THE FLORIDAMOTOPLEX.com
SWAMP_DONKEY
Guest
Re: Trailer Estimation
«
Reply #16 on:
January 01, 2007, 09:17:24 PM »
i HAVE A 20 FT CAR HAULER AND IT FITS 1 RHINO AND 3 FULL SIZE QUADS, IT IS AVAIL FOR SALE IF YOU WANT IT.
3 MONTHS OLD 2200.00
Logged
Fox17
Supreme Member
Offline
Location: Brevard County
Posts: 3636
Go Gators!!
Re: Trailer Estimation
«
Reply #17 on:
January 01, 2007, 09:22:14 PM »
get a big f-250 or equivilent with the longest bed and get a smaller open trailer, put the rhino or the kingquad in the bed of the truck and the rest on the trailer. we put one quad in our truck and 3 on our trailer. we just put a ramp from the truck to the trailer and ride the one in the truck out and on to the trailer and then on the ground. it works great.
Logged
Young Gun
Supreme Member
Offline
Location: Hernando
Posts: 1651
Murray Enterprises
Re: Trailer Estimation
«
Reply #18 on:
January 01, 2007, 10:52:45 PM »
Quote from: GSXR1000 on January 01, 2007, 07:39:49 PM
I have a 20 ft enclosed and I can fit a rhino and 3 quads in there with gear no problem. maybe 4 quads if we packed them in there tight.
good luck with your choice
oh alright, I think we will go 24ft so they arent packed in tightly and can have room to move around. I really want enclosed so if we go camping overnight I would atleast feel more safe with them not in the open.
Logged
2008 KFX450R
Full DASA Exhaust, FCI, Dynojet PC5, Hiper CF1 Beadlocks, ITP GNCC Holeshots, IMS Roll Bumper, ProArmor FAT Peg Nerfbars, Red Radiator hoses, Engine ICE Coolant, Spider Grips, Blingster Rear Grab Bar
2004 TRX450R
Too much to list...
Young Gun
Supreme Member
Offline
Location: Hernando
Posts: 1651
Murray Enterprises
Re: Trailer Estimation
«
Reply #19 on:
January 01, 2007, 10:53:49 PM »
Quote from: SWAMP_DONKEY on January 01, 2007, 09:17:24 PM
i HAVE A 20 FT CAR HAULER AND IT FITS 1 RHINO AND 3 FULL SIZE QUADS, IT IS AVAIL FOR SALE IF YOU WANT IT.
3 MONTHS OLD 2200.00
If only it fit one more quad.
Logged
2008 KFX450R
Full DASA Exhaust, FCI, Dynojet PC5, Hiper CF1 Beadlocks, ITP GNCC Holeshots, IMS Roll Bumper, ProArmor FAT Peg Nerfbars, Red Radiator hoses, Engine ICE Coolant, Spider Grips, Blingster Rear Grab Bar
2004 TRX450R
Too much to list...
Young Gun
Supreme Member
Offline
Location: Hernando
Posts: 1651
Murray Enterprises
Re: Trailer Estimation
«
Reply #20 on:
January 01, 2007, 10:55:57 PM »
Quote from: Fox17 on January 01, 2007, 09:22:14 PM
get a big f-250 or equivilent with the longest bed and get a smaller open trailer, put the rhino or the kingquad in the bed of the truck and the rest on the trailer. we put one quad in our truck and 3 on our trailer. we just put a ramp from the truck to the trailer and ride the one in the truck out and on to the trailer and then on the ground. it works great.
Well we cant really be to picky on the bed size lol. I think a 24ft trailer would be good just BIG lol. I dont know why but I wouldnt trust a ramp holding a 7-11k investment going off the truck to the trailer
Logged
2008 KFX450R
Full DASA Exhaust, FCI, Dynojet PC5, Hiper CF1 Beadlocks, ITP GNCC Holeshots, IMS Roll Bumper, ProArmor FAT Peg Nerfbars, Red Radiator hoses, Engine ICE Coolant, Spider Grips, Blingster Rear Grab Bar
2004 TRX450R
Too much to list...
yunt2ride
Supreme Member
Offline
Location: At the computer
Posts: 2891
Re: Trailer Estimation
«
Reply #21 on:
January 02, 2007, 12:33:12 AM »
Get a 24ft enclosed. Just make sure its the widest available inside. Not sure if you can get 8ft wide but thats what you would need. That way you can park them two side by side front to back and then the rhino at back. Or the rhino up front and your quads near the rear to keep the weight over the axles. Just get the height spec of the rhino and give yourself a little more height room. With a enclosed trailer. People cannot see your toys and you can lock them up out of veiw. Plus it gives you a place to store them while at home. Be sure and get a good trailer tongue lock and then put a good chain or wheel lock on the tires also. The wheel lock should work good.
http://cgi.ebay.com/Car-Trailer-Caravan-Wheel-Clamp-Lock-Anti-Theft_W0QQitemZ250067639139QQihZ015QQcategoryZ76066QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/Fulton-Universal-Trailer-Coupler-Lock-Stop-Theft-NEW_W0QQcmdZViewItemQQcategoryZ50073QQihZ005QQitemZ150075286865QQrdZ1
http://cgi.ebay.com/ebaymotors/Master-Lock-Universal-Trailer-Coupler-Lock_W0QQcmdZViewItemQQcategoryZ33653QQihZ005QQitemZ150075431801QQrdZ1
Logged
1997 Chevrolet 4WD extended cab
2005 Polaris 500HO 4X4 Hunter Edition Camo
Bigscrb15
Supreme Member
Offline
Location: Port Charlotte FL
Posts: 2886
I'm a Florida Mud Rider
Re: Trailer Estimation
«
Reply #22 on:
January 02, 2007, 09:52:04 AM »
Quote from: SuzukiRacer on January 01, 2007, 10:55:57 PM
Well we cant really be to picky on the bed size lol. I think a 24ft trailer would be good just BIG lol. I dont know why but I wouldnt trust a ramp holding a 7-11k investment going off the truck to the trailer
The ramps are very stong and you won't have a problem. It is acutally safer going to the trailer than the ground because the angle is less.
Logged
"When once you have tasted flight, you will forever walk the earth with your eyes turned skyward, for there you have been, and there you will always long to return."
dnigels
Senior Member
Offline
Location: Lake Worth
Posts: 359
Re: Trailer Estimation
«
Reply #23 on:
January 02, 2007, 10:38:36 AM »
Most economic would be the car hauler mentioned and haul the last quad (when you are taking the whole shebang) in the back of your truck. If economics do not enter into the equation get the mega-enclosed trailer huge F-350 diesel to tow it, and ask your parents to adopt me!
Logged
'06 Yamaha 350 Wolverine
'06 Yamaha PW80
'07 Chevy Silverado 1500 Ext.cab
Young Gun
Supreme Member
Offline
Location: Hernando
Posts: 1651
Murray Enterprises
Re: Trailer Estimation
«
Reply #24 on:
January 02, 2007, 05:48:33 PM »
Quote from: yunt2ride on January 02, 2007, 12:33:12 AM
Get a 24ft enclosed. Just make sure its the widest available inside. Not sure if you can get 8ft wide but thats what you would need. That way you can park them two side by side front to back and then the rhino at back. Or the rhino up front and your quads near the rear to keep the weight over the axles. Just get the height spec of the rhino and give yourself a little more height room. With a enclosed trailer. People cannot see your toys and you can lock them up out of veiw. Plus it gives you a place to store them while at home. Be sure and get a good trailer tongue lock and then put a good chain or wheel lock on the tires also. The wheel lock should work good.
http://cgi.ebay.com/Car-Trailer-Caravan-Wheel-Clamp-Lock-Anti-Theft_W0QQitemZ250067639139QQihZ015QQcategoryZ76066QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/Fulton-Universal-Trailer-Coupler-Lock-Stop-Theft-NEW_W0QQcmdZViewItemQQcategoryZ50073QQihZ005QQitemZ150075286865QQrdZ1
http://cgi.ebay.com/ebaymotors/Master-Lock-Universal-Trailer-Coupler-Lock_W0QQcmdZViewItemQQcategoryZ33653QQihZ005QQitemZ150075431801QQrdZ1
yeah I think thats what were going to do, Ive contacted a member on this site selling a 24x8.5 and another memeber contacted me with his trailer. Then I got an email from someone saying they had a 28ft triple axle
I never even thought of security like that. I thought all is need is a padlock on all doors
«
Last Edit: January 02, 2007, 05:51:48 PM by SuzukiRacer
»
Logged
2008 KFX450R
Full DASA Exhaust, FCI, Dynojet PC5, Hiper CF1 Beadlocks, ITP GNCC Holeshots, IMS Roll Bumper, ProArmor FAT Peg Nerfbars, Red Radiator hoses, Engine ICE Coolant, Spider Grips, Blingster Rear Grab Bar
2004 TRX450R
Too much to list...
Pages: [
1
]
2
All
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Classifieds
-----------------------------
=> For Sale / Wanted
-----------------------------
General
-----------------------------
=> Open Discussion
=> Group Rides & Events
=> Where to Ride?
=> Photo Gallery & Videos
=> Tech Corner
=> Racing Scene
=> Product and Services Reviews
=> ATV Activist
Loading...