Home ATV Florida Forum ATV Florida Where to Ride? ATV Florida Links Advertise


Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: tweaked frame needs repair  (Read 2937 times)
Chris505
Senior Member
****
Offline Offline

Location: New Port Richey, Fl

Posts: 445


JUST ADD DIRT!!!!


View Profile

Ignore
« on: July 17, 2005, 12:07:51 PM »

well i got the kfx 700 to roll over the other day,,,
and now it seems when i turn the base of the handle bar clamp is hitting the plastic...
i removed all plastic and the loop on the frame where the clamp that holds the steering shaft maybe bent,, or the frame whole loop Huh???the shaft looks good also,,,it is minor because i can not see where it is bent....



Is there anyone that works on frames?Huh?? that can help HuhHuh
« Last Edit: July 17, 2005, 12:12:55 PM by Chris505 » Logged

05' KFX 700- mine
05' Raptor 350-my sons
04' Quadsport 250- my wifes
TRX450R_Racer
Retired Racer
Supreme Member
*****
Offline Offline

Location: West Palm Beach

Posts: 4171


**** Frank **** **FF&J Racing**


View Profile

Ignore
« Reply #1 on: July 17, 2005, 12:28:13 PM »

Are you sure the stem isn't bent? I would take it out and check it first.
Logged

Member of South East Florida Trail Riders

Life's to short, wear a helmet.
Dress for the crash, not for the ride.
Ripped off by Brandon George.
LakeMaryKid
Supreme Member
*****
Offline Offline

Location: Lake Mary, FL

Posts: 2877


Just a good ole' boy never meanin no harm.


View Profile

Ignore
« Reply #2 on: July 17, 2005, 12:29:57 PM »

you most likely bent your steering stem. Take the stem off and look at it. Highly doubt its your frame. My stem is tweeked and does that too.
Logged

2003 KFX 400
1994 F-150 - 12" SAS 38.5 Boggers
2007 F-150 Supercrew FX4 Luxury
2004 14' Mirrocraft
Chris505
Senior Member
****
Offline Offline

Location: New Port Richey, Fl

Posts: 445


JUST ADD DIRT!!!!


View Profile

Ignore
« Reply #3 on: July 17, 2005, 12:52:03 PM »

i put a straight edge on it and it looks straight,, but at the top at the knuckle that could be bent Huh   i will take the stem out and look a little more closer....

You guys might be right because i went out and i just cant see anywhere that the frame is bent..

Thanks
Logged

05' KFX 700- mine
05' Raptor 350-my sons
04' Quadsport 250- my wifes
Chris505
Senior Member
****
Offline Offline

Location: New Port Richey, Fl

Posts: 445


JUST ADD DIRT!!!!


View Profile

Ignore
« Reply #4 on: July 17, 2005, 06:20:04 PM »

i took the steering shaft out and the shaft does not look bent,, but at the neck, it does look tweaked toward what would be the back of the bike...

But also where the upper mount for the steering stem is,,, the shaft does not go threw the hole perfectly aligned and on the shaft there is paint missing from it not going threw the mount like it is rubbing on the back side,, is this normal



Logged

05' KFX 700- mine
05' Raptor 350-my sons
04' Quadsport 250- my wifes
LakeMaryKid
Supreme Member
*****
Offline Offline

Location: Lake Mary, FL

Posts: 2877


Just a good ole' boy never meanin no harm.


View Profile

Ignore
« Reply #5 on: July 17, 2005, 06:33:10 PM »

dont quite understand where the paint is missing from. Do you have pictures of the stem? The stem itself may not be bent but the bracket for the bar clams may be bent.
Logged

2003 KFX 400
1994 F-150 - 12" SAS 38.5 Boggers
2007 F-150 Supercrew FX4 Luxury
2004 14' Mirrocraft
Chris505
Senior Member
****
Offline Offline

Location: New Port Richey, Fl

Posts: 445


JUST ADD DIRT!!!!


View Profile

Ignore
« Reply #6 on: July 17, 2005, 09:11:23 PM »


I put a straight edge next to the loop, is it suppose to have a little bend or should it be straight,, becasuse where  the red line is there is a bend in the frame not the bracket


and here is the shaft look at the tilt of the whole neck and where the bars mount
and the paint missing a couple inches from the neck.. i drove it a whole day after rolling it
this is the right side

and here is the left


and this is the left side of the bike

it does not look bad but i want to get it as close to OE as posible,,, just dont know what one looks like when they are not broken...
Logged

05' KFX 700- mine
05' Raptor 350-my sons
04' Quadsport 250- my wifes
TRX450R_Racer
Retired Racer
Supreme Member
*****
Offline Offline

Location: West Palm Beach

Posts: 4171


**** Frank **** **FF&J Racing**


View Profile

Ignore
« Reply #7 on: July 17, 2005, 10:50:18 PM »

try to find some points on each side of the frame where you can measure to see if it might be bent were the stem mounts. My friend had his Z400 bend were the stem mounts.
Logged

Member of South East Florida Trail Riders

Life's to short, wear a helmet.
Dress for the crash, not for the ride.
Ripped off by Brandon George.
dirty1
Senior Member
****
Offline Offline

Location: CutlerRidge

Posts: 344


Im in it for the RIDE.....


View Profile

Ignore
« Reply #8 on: July 17, 2005, 11:42:17 PM »

i have had this problem more than once, i have a metal fab shop and i have had to fix this on more than one bike, the upper stem mout has been pushed back. it is very hard to see, the last on i did, i had to use a special hydraulic tool called a porta power and straighten it then weld in gusssets to hold it. if your close to miami bring it by and ill help you fix it.
Logged

foreman 450es
27 mud machine xt's
highlifter lift, superwinch 2000
Pages: [1]   Go Up
  Print  
 
Jump to:  

Other Florida sites of interest: www.PinballShark.com

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!