Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
ATV Florida Forum
>
General
>
Photo Gallery & Videos
>
Banshee back from dyno tuning
Pages: [
1
]
Go Down
« previous
next »
Print
Author
Topic: Banshee back from dyno tuning (Read 9249 times)
TurboBanshee_kid
Supreme Member
Offline
Location: Pembroke pines
Posts: 1506
banshee's 4 life and 2stroke's 4 life!!!!!!!!
Banshee back from dyno tuning
«
on:
June 02, 2006, 09:57:04 PM »
The Banshee was dyno tuned by TDR and is puttong out 50.5 H.P. to the rear wheeles.
I have a video of the Banshee running that i am going to put up!
Also tony put the T.O.R.S. eliminator kit on the banshee!
[attachment deleted by admin]
Logged
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs
TurboBanshee_kid
Supreme Member
Offline
Location: Pembroke pines
Posts: 1506
banshee's 4 life and 2stroke's 4 life!!!!!!!!
Re: Banshee back from dyno tuning
«
Reply #1 on:
June 02, 2006, 09:57:22 PM »
[attachment deleted by admin]
Logged
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs
TurboBanshee_kid
Supreme Member
Offline
Location: Pembroke pines
Posts: 1506
banshee's 4 life and 2stroke's 4 life!!!!!!!!
Re: Banshee back from dyno tuning
«
Reply #2 on:
June 02, 2006, 09:57:45 PM »
[attachment deleted by admin]
Logged
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs
TurboBanshee_kid
Supreme Member
Offline
Location: Pembroke pines
Posts: 1506
banshee's 4 life and 2stroke's 4 life!!!!!!!!
Re: Banshee back from dyno tuning
«
Reply #3 on:
June 02, 2006, 10:21:42 PM »
<a href='
http://media.putfile.com/Yamaha-Banshee
' target='_blank'>Click here to watch 'Yamaha-Banshee'</a>
Logged
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs
TurboBanshee_kid
Supreme Member
Offline
Location: Pembroke pines
Posts: 1506
banshee's 4 life and 2stroke's 4 life!!!!!!!!
Re: Banshee back from dyno tuning
«
Reply #4 on:
June 02, 2006, 10:23:52 PM »
http://media.putfile.com/Yamaha-Banshee
Logged
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs
TurboBanshee_kid
Supreme Member
Offline
Location: Pembroke pines
Posts: 1506
banshee's 4 life and 2stroke's 4 life!!!!!!!!
Re: Banshee back from dyno tuning
«
Reply #5 on:
June 03, 2006, 11:57:39 AM »
?
Logged
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs
Hoosier Daddy
Southern Flat Track League
Supreme Member
Offline
Location: Tampa
Posts: 3872
Team WareRacing Member #07
Re: Banshee back from dyno tuning
«
Reply #6 on:
June 03, 2006, 01:52:18 PM »
Cant get your vid to work...
50 HP, do you have anythng else other than pipes?
What did tony charge you to dyno it? did he do any jetting?
«
Last Edit: June 04, 2006, 09:55:32 AM by WareRacing07
»
Logged
BLISS Feed, Hay, and Race Fuels Zephyrhills, Fl
"Character is what you have when no one is looking"
TurboBanshee_kid
Supreme Member
Offline
Location: Pembroke pines
Posts: 1506
banshee's 4 life and 2stroke's 4 life!!!!!!!!
Re: Banshee back from dyno tuning
«
Reply #7 on:
June 03, 2006, 05:24:12 PM »
it was $170 and he did alot more stuff for me but he treats me like family!
Logged
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs
TurboBanshee_kid
Supreme Member
Offline
Location: Pembroke pines
Posts: 1506
banshee's 4 life and 2stroke's 4 life!!!!!!!!
Re: Banshee back from dyno tuning
«
Reply #8 on:
June 03, 2006, 05:26:16 PM »
2005 engine that has a milled head,wiseco STD pistons, TDR HIGH PERFORMANCE REBUILT CRANKSHAFT trued to .001" and welded, Ricky Stator fly wheel and 200watt stator also timing plate is at +5 and the T.O.R.S. eliminator kit !
I am Running T-5's
Logged
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs
Yamaha72
Supreme Member
Offline
Location: Davie/Orlando
Posts: 890
Re: Banshee back from dyno tuning
«
Reply #9 on:
June 03, 2006, 06:10:25 PM »
Tony is a great guy, very friendly.... The last time I stopped by their he had a banshee being tuned on the dyno that was at 116 and he said he's seen a hair over 120 on his in-house dyno before, now thats arm-ripping power.... BTW nice shee.
Logged
2003 Yamaha Raptor 660
2005 Ford F-150
The Quad FaJa
Supreme Member
Offline
Location: Brandon Florida USA
Posts: 667
05 KFX 440 "4 Sale"
Re: Banshee back from dyno tuning
«
Reply #10 on:
June 03, 2006, 06:51:39 PM »
no Vid from the Dyno?
Logged
TurboBanshee_kid
Supreme Member
Offline
Location: Pembroke pines
Posts: 1506
banshee's 4 life and 2stroke's 4 life!!!!!!!!
Re: Banshee back from dyno tuning
«
Reply #11 on:
June 03, 2006, 07:57:33 PM »
no sorry i was not there for the dyno of the bike!
Logged
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs
The Quad FaJa
Supreme Member
Offline
Location: Brandon Florida USA
Posts: 667
05 KFX 440 "4 Sale"
Re: Banshee back from dyno tuning
«
Reply #12 on:
June 03, 2006, 08:59:15 PM »
Quote from: TurboBanshee_kid on June 03, 2006, 07:57:33 PM
no sorry i was not there for the dyno of the bike!
did you get the paper work of the run?
Logged
TurboBanshee_kid
Supreme Member
Offline
Location: Pembroke pines
Posts: 1506
banshee's 4 life and 2stroke's 4 life!!!!!!!!
Re: Banshee back from dyno tuning
«
Reply #13 on:
June 03, 2006, 09:37:45 PM »
yes 50.5 H.P. good for not being ported or stroked!
Logged
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs
TurboBanshee_kid
Supreme Member
Offline
Location: Pembroke pines
Posts: 1506
banshee's 4 life and 2stroke's 4 life!!!!!!!!
Re: Banshee back from dyno tuning
«
Reply #14 on:
June 03, 2006, 09:38:15 PM »
That is to the rear wheel's
Logged
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs
Smoknbanshee
Supreme Member
Offline
Location: Leesburg
Posts: 3433
When the green light drops, all bull$hit stops!
Re: Banshee back from dyno tuning
«
Reply #15 on:
June 04, 2006, 09:54:19 AM »
not bad results. I would highly advice you to get cubby cylinders instead of definetly boring (does nothing basically) or stroking the bike. cubby cylinders are putting out 90 HP on stock stroke.
Logged
Team FBI (Florida Boy's Inc.)
A$$ Crack Racing
Choke on my Smoke!
Hoosier Daddy
Southern Flat Track League
Supreme Member
Offline
Location: Tampa
Posts: 3872
Team WareRacing Member #07
Re: Banshee back from dyno tuning
«
Reply #16 on:
June 04, 2006, 10:00:58 AM »
Quote from: TurboBanshee_kid on June 03, 2006, 05:24:12 PM
it was $170 and he did alot more stuff for me but he treats me like family!
So you paid 170.00, but it seems your not to sure what you got for that money..?
Do you have a graph?
What jetting did you end with?
«
Last Edit: June 04, 2006, 10:03:44 AM by WareRacing07
»
Logged
BLISS Feed, Hay, and Race Fuels Zephyrhills, Fl
"Character is what you have when no one is looking"
TurboBanshee_kid
Supreme Member
Offline
Location: Pembroke pines
Posts: 1506
banshee's 4 life and 2stroke's 4 life!!!!!!!!
Re: Banshee back from dyno tuning
«
Reply #17 on:
June 04, 2006, 07:04:15 PM »
yes and no. sould i find out?
Logged
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs
Hoosier Daddy
Southern Flat Track League
Supreme Member
Offline
Location: Tampa
Posts: 3872
Team WareRacing Member #07
Re: Banshee back from dyno tuning
«
Reply #18 on:
June 04, 2006, 07:15:25 PM »
seeing how dyno time around here is 100.00 and thats as many pulls and jetting changes as you can make. it might be good idea to find out what all was done, a graph would be good knowledge for you. I say the HP numbers sound right, I think a stock shee is 38ish.. although the crank you have dosent do anything for you (Hp wise) with pipes, timing, head milling & spot on jetting 55hp is very possiable.
For the riding you do, that would be where i would want to be at.
Logged
BLISS Feed, Hay, and Race Fuels Zephyrhills, Fl
"Character is what you have when no one is looking"
Pages: [
1
]
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Classifieds
-----------------------------
=> For Sale / Wanted
-----------------------------
General
-----------------------------
=> Open Discussion
=> Group Rides & Events
=> Where to Ride?
=> Photo Gallery & Videos
=> Tech Corner
=> Racing Scene
=> Product and Services Reviews
=> ATV Activist
Loading...
