Brakes

[ZRIDER]

I still don't have good pressure on my front brakes on my Z400.  I jacked the front end up and wiggled the wheels thinking the bearings might be bad on one side.  But the bearings seemed alright.  The only problem I am finding is the left wheel spins a lot better that the right.  It seems the brake pad is pushed out on the rotor.  I pushed the pad in and when you hit the brakes it gets stuck again.  Anyone have an idea about whats going on with this thing.  I guess I am going to have to tear it down and inspect the parts.  

[TRX350_On_The_Rack]

Simple. Your Right Brake Caliper is sticking, usually from dirt and water. You need to rebuild or replace the caliper then you can worry about flushing and bleeding the brake system.