Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
ATV Florida Forum
>
General
>
Tech Corner
>
jeting for a slipon
Pages: [
1
]
Go Down
« previous
next »
Print
Author
Topic: jeting for a slipon (Read 3799 times)
rubicon500kid
Supreme Member
Offline
Location: homestead
Posts: 3185
jeting for a slipon
«
on:
September 09, 2006, 08:09:04 PM »
i got a yoshie slip on,closed air box and a uni filter what should the jeting be?
thanks
Logged
DROP & DESTROY
87 s10 2/3 soon to be bagged
85 honda 110 atc(22" bearclaws & snorkeld)
01 kx 125 (pc pipe,tag bar's,pro racing rear rim,some lil other stuff
I hate it when you microwave something, then you start eating it, and it's cold in the middle...makes me wanna punch a
4fittyr
Senior Member
Offline
Location: v-town
Posts: 434
Re: jeting for a slipon
«
Reply #1 on:
September 09, 2006, 08:49:08 PM »
try 170 main or 175 main and leave the pilot alone because i have a lrd slip on with k&n and modded airbox with 180 main and it's right on
Logged
if u can't be good be good at it
rubicon500kid
Supreme Member
Offline
Location: homestead
Posts: 3185
Re: jeting for a slipon
«
Reply #2 on:
September 09, 2006, 09:10:28 PM »
thank you so much for the fast reply dose any one know if i can just order the jets ?
Logged
DROP & DESTROY
87 s10 2/3 soon to be bagged
85 honda 110 atc(22" bearclaws & snorkeld)
01 kx 125 (pc pipe,tag bar's,pro racing rear rim,some lil other stuff
I hate it when you microwave something, then you start eating it, and it's cold in the middle...makes me wanna punch a
TRX450R_Racer
Retired Racer
Supreme Member
Offline
Location: West Palm Beach
Posts: 4171
**** Frank **** **FF&J Racing**
Re: jeting for a slipon
«
Reply #3 on:
September 09, 2006, 10:07:56 PM »
I ran a closed air box and a HMF full system and I was running a 150. I think 170 or 175 will be way too rich. I would start at 150 and go from there.
Logged
Member of South East Florida Trail Riders
Life's to short, wear a helmet.
Dress for the crash, not for the ride.
Ripped off by Brandon George.
rubicon500kid
Supreme Member
Offline
Location: homestead
Posts: 3185
Re: jeting for a slipon
«
Reply #4 on:
September 09, 2006, 10:27:25 PM »
arnt you runing a slip on now ? what jets are you runing ?
Logged
DROP & DESTROY
87 s10 2/3 soon to be bagged
85 honda 110 atc(22" bearclaws & snorkeld)
01 kx 125 (pc pipe,tag bar's,pro racing rear rim,some lil other stuff
I hate it when you microwave something, then you start eating it, and it's cold in the middle...makes me wanna punch a
gouza450
Newbie
Offline
Posts: 1
Re: jeting for a slipon
«
Reply #5 on:
September 09, 2006, 11:08:18 PM »
I have a HMF slipon High Comp .020 over & K&N What do you reccomend for jetting
Logged
4fittyr
Senior Member
Offline
Location: v-town
Posts: 434
Re: jeting for a slipon
«
Reply #6 on:
September 09, 2006, 11:36:57 PM »
when u bought ur yoshi u should have ordered a jet kit with and with closed airbox start with the smallest in the kit and work ur way up til it right or open the box and run the 180
Logged
if u can't be good be good at it
rubicon500kid
Supreme Member
Offline
Location: homestead
Posts: 3185
Re: jeting for a slipon
«
Reply #7 on:
September 09, 2006, 11:42:51 PM »
would it hurt my bike if i road for like 4 hours with out jeting it ? i bought the yoshie used so it didnt come with jeting
Logged
DROP & DESTROY
87 s10 2/3 soon to be bagged
85 honda 110 atc(22" bearclaws & snorkeld)
01 kx 125 (pc pipe,tag bar's,pro racing rear rim,some lil other stuff
I hate it when you microwave something, then you start eating it, and it's cold in the middle...makes me wanna punch a
TRX450R_Racer
Retired Racer
Supreme Member
Offline
Location: West Palm Beach
Posts: 4171
**** Frank **** **FF&J Racing**
Re: jeting for a slipon
«
Reply #8 on:
September 10, 2006, 08:19:04 AM »
Quote from: trx450kid on September 09, 2006, 11:42:51 PM
would it hurt my bike if i road for like 4 hours with out jeting it ? i bought the yoshie used so it didnt come with jeting
It will rin like crap and also run hot. Lean=Hot.
Now I run a DR D slip-on with a quiet insert. I have an EHS lid. It is just like running an open air bax as far as flow is concerned, but still with some protection from the elements. I have a 50 pilot with 2 1/2 turns out on the screw. Stock is a 48. Whan I had the stock needle the clip was on the second slot from the bottom, so it was moved up slightly. Now I have the HRC needle and it is on the center slot. My main jet is a 180.
Like I said before start with a 150 or call Yosh. I'm sure they will be glad to help you with that information
Logged
Member of South East Florida Trail Riders
Life's to short, wear a helmet.
Dress for the crash, not for the ride.
Ripped off by Brandon George.
rubicon500kid
Supreme Member
Offline
Location: homestead
Posts: 3185
Re: jeting for a slipon
«
Reply #9 on:
September 10, 2006, 08:38:59 AM »
thanks im going to call them monday
i also went from a 13/41 gearing to a 13/38 and boy was it better its alot faster now
Logged
DROP & DESTROY
87 s10 2/3 soon to be bagged
85 honda 110 atc(22" bearclaws & snorkeld)
01 kx 125 (pc pipe,tag bar's,pro racing rear rim,some lil other stuff
I hate it when you microwave something, then you start eating it, and it's cold in the middle...makes me wanna punch a
rubicon500kid
Supreme Member
Offline
Location: homestead
Posts: 3185
Re: jeting for a slipon
«
Reply #10 on:
September 16, 2006, 10:16:31 PM »
would these be good to buy ?
http://www.powersportsnetwork.com/enthusiasts/catalog_item_detail.asp?catalog=776&levelcode=5994&product=61782&cattype=&ProductCategoryCode=
the one im looking at is
DG KEIHIN 5-PAK MAIN JET KIT 150-160 – Jets 150,152,155,158,160
it has 150-160 so i can try and find wich one would work good with it
also should i move the needle the clip and adjust the screw ? and should i get a biger pilot
Logged
DROP & DESTROY
87 s10 2/3 soon to be bagged
85 honda 110 atc(22" bearclaws & snorkeld)
01 kx 125 (pc pipe,tag bar's,pro racing rear rim,some lil other stuff
I hate it when you microwave something, then you start eating it, and it's cold in the middle...makes me wanna punch a
rubicon500kid
Supreme Member
Offline
Location: homestead
Posts: 3185
Re: jeting for a slipon
«
Reply #11 on:
September 17, 2006, 11:49:53 AM »
bump
Logged
DROP & DESTROY
87 s10 2/3 soon to be bagged
85 honda 110 atc(22" bearclaws & snorkeld)
01 kx 125 (pc pipe,tag bar's,pro racing rear rim,some lil other stuff
I hate it when you microwave something, then you start eating it, and it's cold in the middle...makes me wanna punch a
rubicon500kid
Supreme Member
Offline
Location: homestead
Posts: 3185
Re: jeting for a slipon
«
Reply #12 on:
September 20, 2006, 06:25:02 PM »
bump
Logged
DROP & DESTROY
87 s10 2/3 soon to be bagged
85 honda 110 atc(22" bearclaws & snorkeld)
01 kx 125 (pc pipe,tag bar's,pro racing rear rim,some lil other stuff
I hate it when you microwave something, then you start eating it, and it's cold in the middle...makes me wanna punch a
4fittyr
Senior Member
Offline
Location: v-town
Posts: 434
Re: jeting for a slipon
«
Reply #13 on:
September 20, 2006, 06:47:19 PM »
hey kid go to magic racing.com and get the lrd jet kit 21.95 170 175 180 185 instructions and u wont be sorry
Logged
if u can't be good be good at it
rubicon500kid
Supreme Member
Offline
Location: homestead
Posts: 3185
Re: jeting for a slipon
«
Reply #14 on:
September 20, 2006, 06:49:50 PM »
thanks but wont those be a lil big for just a slipon with a closed air box
Logged
DROP & DESTROY
87 s10 2/3 soon to be bagged
85 honda 110 atc(22" bearclaws & snorkeld)
01 kx 125 (pc pipe,tag bar's,pro racing rear rim,some lil other stuff
I hate it when you microwave something, then you start eating it, and it's cold in the middle...makes me wanna punch a
4fittyr
Senior Member
Offline
Location: v-town
Posts: 434
Re: jeting for a slipon
«
Reply #15 on:
September 20, 2006, 07:05:13 PM »
cut out the back porshon of the box u'll see the shape i'm talking about and buy another on ebay for closed one, with the hrc kit lid mine has the splash guard on it stock is a 118
Logged
if u can't be good be good at it
Pages: [
1
]
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Classifieds
-----------------------------
=> For Sale / Wanted
-----------------------------
General
-----------------------------
=> Open Discussion
=> Group Rides & Events
=> Where to Ride?
=> Photo Gallery & Videos
=> Tech Corner
=> Racing Scene
=> Product and Services Reviews
=> ATV Activist
Loading...
