|
Title: power valve on a kdx 200 Post by: warrior123 on October 11, 2005, 11:36:54 PM i have an 88 kdx 200 that i just rebuilt. put it together ran like crap so i took it apart and went back through everything, what does the power valve do and is it pretty easy to replace? i know where it is, i think, but what does it do any help would be appreciated
Title: Re: power valve on a kdx 200 Post by: Old_School on October 12, 2005, 09:48:05 AM Well I don't have a kawi but both my zuki's have power valves. A power valve is an adjustable(valve) that lets you move your powerband up or down in the rpm band. On one side of the motor there should be a window (alteast on mine) and the adjacent side should be a the valve adjuster. Loosen the screws and turn it accordingly to what you like. Hope this helps. -Mark
EDIT: It should be located toward the front of the motor. Just under the exhaust port. I don't think you need to replace it. It's probably just needs to be adjusted. Or you could have put it back together wrong. |