ATV Florida Forum

General => Open Discussion => Topic started by: jon457 on July 05, 2005, 04:34:43 PM



Title: how to wheelie a raptor 350
Post by: jon457 on July 05, 2005, 04:34:43 PM
yes i was wondering what do i have to do to wheelie a raptor 350


Title: Re: how to wheelie a raptor 350
Post by: bigb on July 05, 2005, 05:05:40 PM
put your helmet on, sit a little further back on the seat than you normally would. pull the clutch and put it in 1st gear mash the gas all the way give it a second to build some RPM and slide your finger off the clutch, that should get you started.


Title: Re: how to wheelie a raptor 350
Post by: big-daddy on July 05, 2005, 05:12:11 PM
jon457, didnt listen to bigb  ;) you will be on your back.


Title: Re: how to wheelie a raptor 350
Post by: jon457 on July 05, 2005, 05:16:57 PM
oh ok so how do u do it then


Title: Re: how to wheelie a raptor 350
Post by: klutchbuster400 on July 05, 2005, 05:19:34 PM
just shift your weight back, pucnh it and pull the bike back. who needs a clutch anyways lol


Title: Re: how to wheelie a raptor 350
Post by: bigb on July 05, 2005, 05:37:28 PM
i just told you how to do it. just make sure to use your helmet.


Title: Re: how to wheelie a raptor 350
Post by: big-daddy on July 05, 2005, 08:51:32 PM
just shift your weight back, pucnh it and pull the bike back. who needs a clutch anyways lol

I say the same about brakes... jon457, klutchbuster350 has the right idea.


Title: Re: how to wheelie a raptor 350
Post by: klutchbuster400 on July 09, 2005, 02:26:57 PM
just shift your weight back, pucnh it and pull the bike back. who needs a clutch anyways lol

I say the same about brakes... jon457, klutchbuster350 has the right idea.
thanx, i learned from the best ;D* gery350* lol


Title: Re: how to wheelie a raptor 350
Post by: dirty1 on July 10, 2005, 01:49:14 AM
Go find your fattest friend put a pillow in the back of his shirt and put him on the back of the bike, no hit the gas and lean back untill he screams then let off a little


Title: Re: how to wheelie a raptor 350
Post by: svtbolt04 on July 10, 2005, 05:37:55 PM
Man, I thought EVERYONE knew how to pop a wheelie...


Title: Re: how to wheelie a raptor 350
Post by: jon457 on July 10, 2005, 10:35:05 PM
well i am new to this i kind off already have the hang of it i just got to work a lil better on it im almost there thank to some you for helping me


Title: Re: how to wheelie a raptor 350
Post by: apkkfx400 on July 12, 2005, 04:07:33 PM
You can use the clutch, especially if you're doing a wheelie from a stopped position-don't know any other way.  You really don't have to rev up engine too much-releasing clutch handle and giving it gas at the same time is your best bet-too much gas you'll end up on the grab bar.  It will take a while but you'll find the quads balance point-it's that point where it almost feels like it will go all the way to the grab bar but doesn't-hard to explain but you'll know when you find it.  Also, don't shift into higher gears with clutch when popping a wheelie-front wheels will fall back down almost every time when upshifting w/clutch.
 


Title: Re: how to wheelie a raptor 350
Post by: 01_DS650 on July 18, 2005, 03:26:13 AM
the best way to learn how to wheelie is first go all the way back and learn that doesn't hurt. Then a wheelie is all about throdle control not leaning. if u have to u can use the rear break to keep it from going to far back and thats about it . its all about practice. I can wheelie my big ds650 and i have to say thats way harder than a samller sport bike


Title: Re: how to wheelie a raptor 350
Post by: rubicon500kid on July 18, 2005, 09:18:06 PM
how do i wheelie my rancher lol i already tried it by  standing on the back rack and mashin the gas but just went normal


Title: Re: how to wheelie a raptor 350
Post by: klutchbuster400 on July 20, 2005, 12:04:44 PM
lol my freind wheelies his dads wolverine, basically put one foot on the back bar, keep your foot on the shifter, put it into second, then click it down and hold it down into first, rev the crap out of the gas and let go of the shifter, itll come up, but i dont reccomend doing this alot, its like the same thing as popping the clutch but there could be consequenceas 2 it that i dont know about :-\


Title: Re: how to wheelie a raptor 350
Post by: ppark350se on August 28, 2005, 09:45:05 PM
you just do it. 8)


Title: Re: how to wheelie a raptor 350
Post by: L.E._YFZ_2005 on September 28, 2005, 10:58:18 AM
the bike wants to come up just  lean back as you hit the gas.. or find some woops and   punhc it  going over each one and get the feel  warning though  once you get use to it you wont  dirve with 4 wheels ever ont he ground lol


Title: Re: how to wheelie a raptor 350
Post by: BlueRaptor700R on September 29, 2005, 02:46:44 PM
Its natural.  Hardly anybody can tell you how to do it.


Title: Re: how to wheelie a raptor 350
Post by: Honda250ex on October 02, 2005, 07:31:40 AM
Hold clucth and floor it and pop the clucth


Title: Re: how to wheelie a raptor 350
Post by: Honda250ex on October 21, 2005, 10:42:29 PM
Shut up That what happend to you whene you listen too atv action RIDING TIPSE.


Title: Re: how to wheelie a raptor 350
Post by: BigRanger on October 22, 2005, 01:01:37 PM
Just keep practiceing, thats what I did and now I can ride them all day. You can even get the 350 up in 4th if you stand on the back with one foot and rev the hell out of it then pop the clutch. I'm hoping with new filter, pipe, and jet kit, the thing will come up in 2nd with no clutch. I'll find out in a couple weeks. ;D