ATV Florida Forum

General => Tech Corner => Topic started by: quwon on October 10, 2010, 09:09:05 AM



Title: Roketa 250 ATV wont move ....much....but it tries!!
Post by: quwon on October 10, 2010, 09:09:05 AM
its a 09 atv...was running strong sounded great any everything.....out the blue this thing wont move for *$&(!!!...HELp plz!!


Title: Re: Roketa 250 ATV wont move ....much....but it tries!!
Post by: Mars on October 10, 2010, 08:58:10 PM
Broke belt?


Title: Re: Roketa 250 ATV wont move ....much....but it tries!!
Post by: AintSkeered on October 11, 2010, 06:36:02 PM
Does it have a CVT belt? If so, loosen the CVT cover and see if water drains out. If not, take cover off and take a look at the belt. If it's severely worn/frayed/pieces missing, replace it. If belt's OK, you may also have an issue with the driven pulley. The pulley is supposed to loosen/tighten the belt as you vary your speed. Do not visually inspect for that unless you're sure there's no belt pieces of other debris to fly into your face at a high rate of speed.