ATV Florida Forum

Who would be interested in a dyno shootout?  I have a good friend that is trying to get something set up.  Before he does that, we need some feedback on who would be interested.  Probably be setup with a few different classes, get on the dyno make 2 pulls and take the best one.  2-stroke (oem cylinder, cubs, blasters, etc.) & 4-stroke classes (stock crank, stroked crank, 400cc and less, 450 cc and up).  It would be on a saturday and would be located in Lake County.  So who would be coming?

i would be intersted  but  you cant do it with knobbie  tires  i dont got any slicks

but i would   come  just to see what mine does hp wise

tires would most likely be supplied, to make the dyno numbers on different bikes equal, everyone would run the same set of tires.  slicks.

ok count me   in how much would we need to pitch in

count me in for  3 bikes smoke

Ill  drink  beer  and  watch ! ;D

O what the hell!! lets see what this flat track motor on AKLY will do with some drag pipes on it!!!

will yamahondaman be there to hold your hand and drink beer with you?  do we need to bring in some beer tub girlz?

let us know when and where

lets go smoke put it together and lets get it on

I AM SETTING THINGS UP   AND WILL COME UP WITH DATES REAL SOON THANKS

sounds great. date and time' I'll try to get the day off

Yes  and  yes  you  over  sized  tool ! ;D

Tim,

    Maybe if you finally get your bike running you can dyno yours too.... ;D

we don't dyno tri-cycle with the little basket on the back to carry beer coolers...we only dyno things that actually have a motor in them, not a motor mouth on them...

let the low blows begin...

Ouch ! :o    And  I  thought  you  guys  where  my  buds. :'(   I  see  pain  and  misery  in  your  near  futures !!! ;) ;D ;D ;D

ummmm.... would sorry help? :(

sorry would help but the truth hurts lol

Ahhhh , Now  Gary  wants  some  too.   Im  putting  a  Husky  chainsaw  motor  on  my  tri-cycle , runnin  it  on  alky  and  plan  on  skinnin  some  azz  up !!! ;D ;D ;D   Bring  it  suckas !!! ;)

Yes  and  yes  you  over  sized  tool !   quad 32 you would know  ;D
 

Dang  it  cut !!! :-\   That  was  between  me  and  you.   Why  you  gots  to  tell  everybody  bout  my  oversized  TOOL ?? :o   That  was  just  for  the  ladies  to  know !!! ;D ;D ;D ;D

Where is this place? I would like to know what my quads put down.  -Mark

thanks for reminding me....cut i will call you, we need to proceed with doing this the 4th saturday of august....SUCKA

hey guys ....check out this post ! Might be for you !


http://www.atvflorida.com/forum/index.php/topic,5168.0.html

 ok i need little more feed back i talk to the boys  today about a small entry  fee for a hp run on the dyno  this will be for fun and braging rights and a dyno sheet  on your quad and show your quad off there  will be food and drink and will be on a satuerday date to be determand yet let me have your feed back thanks troy

who's providing tires?  what time?  you going to do classes and pay some of the money out?  you going to have a gate fee?  how many pulls on the dyno?  why not the 4th saturday?  that enough feedback?  let's do it, don't be scared....

if its not to far i will be there  to see how the ol  honda does

the shootout will be close to leesburg...i knwo that for a fact....if cut will get this $hit rolling we can get a date set.....let's do it dang it....

the place is in ocala   on 441  its called torri racing   one dyno run per quad we are working on the tires it will be a warm up run and a hp run we may need help on  wheels and tires for the dyno  the 4 saturday may work out what do you think

i say that i know a stock cylinder stock stroke 350 motor that is going to put a a$$ whooping on some cub cylinders motors...bring your money boys, cause smoke is getting crazy up in here....can we get a physical (haha) address on torri racing?  by the way, what does TORRI look like? 

on a more serious note, i say 4th saturday bring it don't sing it....i might be able to get my grubby palms on some tires....yamaha bolt pattern though...where there be restrooms? (LMFAO)

Torri  Racing   13599  South  US  Hwy  441  Lady  Lake , Fl.  352-753-7522.  They  say  Lady  Lake  but  its  right  in  the  middle  of  The  Villages  on  the  east  side  of  441.  Kinda  small  so  keep  your  eyes  open ! ;D

 SO WHATS UP DO WANT  DO THIS OR WHAT ;D

O.K who wants to know what the orange crush can do ???cut , you forgot to mention that if somebody gets work done after the fact that the entry $ will be deducted from the bill correct??, Come on guy`s & ladies cut needs some feed back or it wont happen!!!, everybody want`s it till it gets close or what??       Cut lets see what the ole` DS can do!?!

 Then again maybe the tribals don`t want to know what their bikes are or arent putting out (J/K)

i am staying out of this, but i see atleast 50 bikes being there....

If there isn't a 2 stroke there thats putting out more than 100 hp theres no need to show up. Just go to planet sand and you'll see exactly what cubs put out . Give or take 3-4 hp.  ;D  actually, sounds pretty cool unfortunately I won't be able to make it. going crazy trying to beat this rain! You know what I'm talking about cut! Have fun! See Ya

Now , Now , Lupo- dont` take it personal I was only joking !!!! get it (J/K)?!?, hope to see some of the other tribals there though!

Dyno shootouts are for you gear missing, wheelie riding, tire spinning, $hit talking, red lighting, two cylinder riding..............
 First one to the finish line wins ;D watch out or ya might get beat by a 40hp 4 stroker :'(

I`m with you chillin, GOOD one ;D

    And  I  drink  beer  with  this  man !! ;D ;D

WAS SOMEONE HERE LOOKING FOR A SET OF STOCK UNPORTED CYLINDERS? I HAVE A SET AND A STOCK CRANK IF ANYONE IS INTERESTED. PM ME OFFERS!

anymore on this or is it not going to happen

yes this will happen  i will post dates this week