|
Title: TRX450R KILL SWITCH Post by: FTR44C-REP on June 23, 2005, 08:43:31 AM ANYBODY INSTALL A PRO DESIGN KILL SWITCH ON THEIR TRX450R? WHICH WIRES DO I SPLICE INTO?
THANKS. Title: Re: TRX450R KILL SWITCH Post by: Mrs.Nightbreed on June 23, 2005, 05:23:57 PM Splice into the power wire that goes to the coil and ground the other wire to the frame. If you have any problems you can shoot me a PM or call.
Title: Re: TRX450R KILL SWITCH Post by: TRX450R_Racer on June 23, 2005, 09:36:59 PM You hook on side of the swith to the green wire and the other to the black with a white stripe. If you sre going to remove your key swith you must hook the 2 remaining wires together so you fan and headlights will work. The 2 other wires are red and black. Make sure you hook the kill switch up to the black with a white stripe and not the palin black one.
|