ATV Florida Forum

General => Tech Corner => Topic started by: David_James on April 18, 2009, 01:59:27 AM



Title: question about crank cases...
Post by: David_James on April 18, 2009, 01:59:27 AM
the left side case on my ltz is cracked....bad. is ok to get another used case (just the leftside) and use it with my right side case??? someone told me it wasnt good on the bottom end. i dont know if its true or if he just said that so i would buy both sides. i would think if i changed all the bearings in both side it would be ok, right???


Title: Re: question about crank cases...
Post by: TRX450R_Racer on April 18, 2009, 09:45:26 AM
You will be fine if you change the bearings or not.


Title: Re: question about crank cases...
Post by: David_James on April 18, 2009, 12:20:27 PM
thats what i thought. i figured he was either b.s.in' me or he thinks he knows more than he really does. i might have to buy a full crank case anyway b/c i cant find just the left side. im gonna keep looking before i do that tho. i can get a new complete case for $369 but i would rather spend less...


Title: Re: question about crank cases...
Post by: svtbolt04 on April 19, 2009, 04:26:05 AM
Check out Ronnies.com for the OEM case you need. Im sure you can order just one side.


Title: Re: question about crank cases...
Post by: David_James on April 19, 2009, 02:46:20 PM
i forgot all about ronnies. thanks for the reminder. i check it out and see.


Title: Re: question about crank cases...
Post by: David_James on April 19, 2009, 02:53:32 PM
nope no luck. both sides only


Title: Re: question about crank cases...
Post by: TRX450R_Racer on April 19, 2009, 09:08:11 PM
Check out www.z400central.com you might be able to get a used one on there.


Title: Re: question about crank cases...
Post by: Mrs.Nightbreed on April 20, 2009, 02:23:52 PM
Z400's don't have a center case gasket and are machined together like the YFZ's and LTR's. They have to be bought in pairs.


Title: Re: question about crank cases...
Post by: David_James on April 22, 2009, 12:04:34 AM
yeah i talked to a few mechanics and they told me i need a set, just one side wont cut it. i found a complete case, new for $370 www.leesin.com . thats not a bad price... almost half compared to everywhere else.