|
Title: 1997 300ex chain Post by: dodgefsu on November 10, 2008, 06:36:59 PM Can anyone tell me how to tighten the chain on a 1997 honda 300ex.......
Title: Re: 1997 300ex chain Post by: craigdieselmac on November 26, 2008, 12:14:42 AM 1. Locate bearing carrier clamp bolts on very back end of swing arm-loosen but do not remove
2. Right beside your rear sprocket you should notice 3-4 slots (if you just got done with the bolts, it will be directly to your left) 3. Get a big screwdriver and use the slots to turn the bearing carrier, do this until you reach desired tension Hope this helps you out |