|
Title: snorkel jetting Post by: outindeltona on July 30, 2008, 01:20:09 PM i cant seem to find any info on the jet i need.did a snorkel on a lil 250 recon,runs like crap at full throttle.ran fine before the snorkel.tried raising the needle,got a lil better,but still loses power.with the choke on it runs ok so i need to go richer right?any idea how big a jet i need?stock exhaust/intake with only a 1.5" snorkel added
Title: Re: snorkel jetting Post by: IXIswamperIXI on July 30, 2008, 01:51:48 PM I am not a rocket scientist here but I would assume the problem is that your motor has to work a lot harder to suck in the air where as before it didn't have to work that hard. I am no good with jetting so I couldn't tell you if changing the jets would help.
Title: Re: snorkel jetting Post by: outindeltona on August 01, 2008, 09:50:33 AM well,i guess it was actually getting too much air,the tubing i used was about 1/4 in bigger opening at the end than the stock stuff was.reduced it down to the same size and it runs great!!!
|