|
Title: Brakes Post by: ZRIDER on April 08, 2005, 01:41:45 PM I still don't have good pressure on my front brakes on my Z400. I jacked the front end up and wiggled the wheels thinking the bearings might be bad on one side. But the bearings seemed alright. The only problem I am finding is the left wheel spins a lot better that the right. It seems the brake pad is pushed out on the rotor. I pushed the pad in and when you hit the brakes it gets stuck again. Anyone have an idea about whats going on with this thing. I guess I am going to have to tear it down and inspect the parts.
Title: Re: Brakes Post by: TRX350_On_The_Rack on April 08, 2005, 02:26:55 PM Simple. Your Right Brake Caliper is sticking, usually from dirt and water. You need to rebuild or replace the caliper then you can worry about flushing and bleeding the brake system.
|