|
Title: jet Post by: CABLEGUY1 on May 22, 2005, 08:52:32 AM which is it?
[attachment deleted by admin] Title: Re: jet Post by: TRX450R_Racer on May 22, 2005, 09:10:12 AM It's hard to see the pic good, but the red (if it is a flat head screw is the idle air screw. The yellow looks like the main jet. It could be the pilot jet or low speed jet. The way to tell is unscrew it. If it is really long and has a bunch of little holes going all the way around the long part that is up in the carb it is a pilot jet. If it is short with just some threads up in the carb with one hole through the middle it is the main jet. Also the needle goes down through the main jet. Hope this helps.
Title: Re: jet Post by: cain73 on May 22, 2005, 09:34:11 AM Blue is the main jet 165
Yellow is the starter jet 32.5 and the one between them is the pilot jet 40 with a thin long screwdriver remove the main jet (the surrounding sheath may come with -it's ok jet put it back with the new jet) put in the 175 main and screw it back in making sure it's snug, but now stripping it. Title: Re: jet Post by: cain73 on May 22, 2005, 09:36:14 AM Cableguy1 -
if you have adobe acrobat reader 6.0 on your computer I can send you a pdf of the manual and diagrams with the parts list. Title: Re: jet Post by: CABLEGUY1 on May 22, 2005, 11:51:04 AM 1
[attachment deleted by admin] Title: Re: jet Post by: CABLEGUY1 on May 22, 2005, 11:51:23 AM 2
[attachment deleted by admin] Title: Re: jet Post by: CABLEGUY1 on May 22, 2005, 11:51:41 AM 3
[attachment deleted by admin] Title: Re: jet Post by: CABLEGUY1 on May 22, 2005, 11:52:06 AM 4
[attachment deleted by admin] Title: Re: jet Post by: CABLEGUY1 on May 22, 2005, 11:53:03 AM 5
[attachment deleted by admin] Title: Re: jet Post by: CABLEGUY1 on May 22, 2005, 11:56:58 AM 6
[attachment deleted by admin] Title: Re: jet Post by: CABLEGUY1 on May 22, 2005, 11:58:16 AM 7
[attachment deleted by admin] Title: Re: jet Post by: Da_Mtg_Man on May 22, 2005, 12:16:20 PM Hey Keith, You should aply at Home Shopping as a hand model. ;D
Title: Re: jet Post by: cain73 on May 22, 2005, 12:48:52 PM I keep your day job regarding the hand modeling, but the needle set up is right. After you run it wide open you should notice a difference in performence and throttle response. If there is any spot where is hesitates or "stumbles" you may need to move the needle clip up 1 position, but for our elevation it should be right the way you have it. Either reply here or give me a call and let me know how it went.
Now the next step is that intake ;D. Joe Fast is never fast enough, and faster is only good when it's faster than what you already have. Title: Re: jet Post by: CABLEGUY1 on May 22, 2005, 07:02:58 PM Hey Cain, I cant sleep knowing I posted pics with my bike so dirty.You know I have to represent for the DS people. So here it is after it had it's bath. You would be hard pressed to find a cleaner 2001. Yes I use a toothbrush to clean it. Thanks again for helping me through the jetting process. I owe you one.
[attachment deleted by admin] Title: Re: jet Post by: CABLEGUY1 on May 22, 2005, 07:03:37 PM 2
[attachment deleted by admin] Title: Re: jet Post by: CABLEGUY1 on May 22, 2005, 07:04:09 PM 3
[attachment deleted by admin] Title: Re: jet Post by: cain73 on May 23, 2005, 10:38:18 AM Looks good. Now I need to know... how did it run?
I was glad to help. Us DS guys got to stick together. I look forward to seeing you on the trail. Joe |