ATV Florida Forum

General => Open Discussion => Topic started by: 300 quadrunner on December 23, 2007, 06:04:23 PM



Title: I NEED HELP!!!!!
Post by: 300 quadrunner on December 23, 2007, 06:04:23 PM
my 86 300 quadrunner wont spin the tires, i dont know what could be wrong with it, i put it in 1st gear and it shifts forward, but wen i give it gas it seems like its in neutral, and the same thing wen i go to reverse, what could the problem be?????  is it fixable, and how much?????   :banghead.gif :banghead.gif :banghead.gif :banghead.gif :banghead.gif :banghead.gif :banghead.gif :banghead.gif :banghead.gif :banghead.gif :banghead.gif :banghead.gif :banghead.gif :banghead.gif :banghead.gif :banghead.gif :banghead.gif :banghead.gif :banghead.gif :banghead.gif :banghead.gif


Title: Re: I NEED HELP!!!!!
Post by: Young Gun on December 23, 2007, 06:14:38 PM
Wait... it doesn't move period?  Or it just won't get the tires loose?  Confused.


Title: Re: I NEED HELP!!!!!
Post by: 1FasterBlaster on December 23, 2007, 06:30:27 PM
  Sounds to me like you might of burned out a gear or two.


Title: Re: I NEED HELP!!!!!
Post by: MedicMudder on December 23, 2007, 06:57:11 PM
will it move at all?what if you go into 2nd gear?have you tried putting into lowrange?


Title: Re: I NEED HELP!!!!!
Post by: Fox17 on December 23, 2007, 11:58:41 PM
does it do it in all gears? if its shaft driven you might have screwed the differential or the drive shaft. i had a 86 TRX250 that wouldnt move in any gear and it was stripped gears in the diff. just bought the parts from ebay for less than $100 and it took bout half a day to do the work. the 86 would move a tad when put in gear but made a grinding noise and wouldnt go anywhere. was basically in neutral. does it make any noises? try a different gear.


Title: Re: I NEED HELP!!!!!
Post by: 300 quadrunner on December 24, 2007, 10:24:18 AM
i tried all 5 gears, and then reverse, it jolts in the direction (1st gear forwards and reverse-backwards) but when i give it gas it doesnt move, seems like it is in neutral, its chain driven, and when i do put it in gear the chain tightens, like it is supposed to, so its something internal


Title: Re: I NEED HELP!!!!!
Post by: slam1 on December 24, 2007, 12:05:42 PM
Does it roll in neutral? If not, axle bearings.


Title: Re: I NEED HELP!!!!!
Post by: Fox17 on December 24, 2007, 01:39:43 PM
yea, some kind of bearings or a brake issue. on that 86 bike i had, the brakes locked up and thats what caused the whole problem. i had a CR do that too. it moved a lil but not very much. check them and see if they got locked up some. if not, youre screwed. its internal if it will roll in neutral.


Title: Re: I NEED HELP!!!!!
Post by: crom A zone on December 24, 2007, 02:29:24 PM
hey join us in the year 2007 well soon 2008 buy a new bike  ::)


Title: Re: I NEED HELP!!!!!
Post by: Fox17 on December 24, 2007, 02:59:22 PM
hey join us in the year 2007 well soon 2008 buy a new bike  ::)

they dont make em quite like they used to.


Title: Re: I NEED HELP!!!!!
Post by: 300 quadrunner on December 24, 2007, 05:56:23 PM
i plan on buying a new foreman after i graduate, but for now my lil quadrunner does me fine, hell better then fine, i love that thing, but it does roll in neutral, so i guess its off to broward motorsports to fix it


Title: Re: I NEED HELP!!!!!
Post by: slam1 on December 24, 2007, 06:04:40 PM
That sucks, there goes the easy fix. Hope its something cheap.


Title: Re: I NEED HELP!!!!!
Post by: 300 quadrunner on December 24, 2007, 06:09:56 PM
yup, figured it would catch up to me, that bike runs dam good for being so old, and i bought it for 400 and but gators on it thats the only investment in that bike.... well time to break out the check book


Title: Re: I NEED HELP!!!!!
Post by: crom A zone on December 25, 2007, 11:24:25 AM
why dont u fix it your self?   dealers dont no what they are doing   i can get it fixxed easy fix


Title: Re: I NEED HELP!!!!!
Post by: SCRAMBLER on December 25, 2007, 08:43:40 PM
Could be the clutch.


Title: Re: I NEED HELP!!!!!
Post by: Mars on December 25, 2007, 09:44:12 PM
Could be the clutch.
I'll 2nd that.
Most semi-auto trans have two clutch sets your centrifugal clutch may be worn out or stuck.


Title: Re: I NEED HELP!!!!!
Post by: 300 quadrunner on December 28, 2007, 12:33:43 PM
yea it is the clutch, is there any special tools needed for the gearing or ne thing?????? of not then i will tear that damn thing apart tongith


Title: Re: I NEED HELP!!!!!
Post by: crom A zone on December 29, 2007, 11:46:55 PM
yea you need 150mph duct tape(nascar aproved) 24 pack of bush beer(in the hunter endition box) and some tie straps (the colored ones so it looks cool)
and you can not for get the hammer, and one other thing   rag and a match just put it in the gas tank and all the problems be fixxed in like  5 min




Title: Re: I NEED HELP!!!!!
Post by: 300 quadrunner on January 02, 2008, 11:30:53 AM
lmao