Title: tie rods/steering question?? Post by: bigwake on October 29, 2007, 08:28:43 PM its a 2000 banshee..i turn the wheel all the way left and the inside of the left rim can touch the a arm..when i turn all the way right..there is no contact..it stops before it touches anything..i can see where paint is scrapped off of the a arm where the left riim rubs..how do i fix this? and is it major? i jump but not huuge air..like maybe 6 ft or so..and 15 ft long at most..i've ridden it maybe 6 hours and haven't had any problems with the steering..but i noticed this problem since day 1..waht do you all think?
Title: Re: tie rods/steering question?? Post by: TRX450R_Racer on October 29, 2007, 10:00:04 PM Are both the tires straight when the bars are straight? Have you checked the toe? I would start by checking the toe. Do you know how to do that?
Title: Re: tie rods/steering question?? Post by: bigwake on October 29, 2007, 10:34:07 PM yes both tires are straight..and i don't know about toe
Title: Re: tie rods/steering question?? Post by: RTN on October 30, 2007, 04:01:04 PM Your stem "stops" might be bent. On some bikes the stops are rubber and one might have come out.
Or....you could have a bent frame, a-arm, tie rod Go here---->http://www.wrcracing.com/technical-support/<----to find out how to adjust toe Title: Re: tie rods/steering question?? Post by: bigwake on October 30, 2007, 05:14:25 PM ok thanx i'll check it out
|