|
Title: 84 toy 4x4 bad rr wheel bearing,help please Post by: atvrob on October 05, 2007, 06:04:34 PM should i pull out my axle shaft on that side and take it to a machine shop, i know when i replaced the rear chunk i just took the 4 bolts off the back of the drum and the axle slid out enough too change my chunk. will that axle shaft slide all the way out,then get abearing at auto zone,and have them press off and on at a shop. its poping and clickiingbad when im rolling slow.i need to do something,i know someone has to know whats best to do
Title: Re: 84 toy 4x4 bad rr wheel bearing,help please Post by: Chillinthemost on October 15, 2007, 05:53:28 PM It will pull all the way out. Make sure you dont have a bad U- joint first though.
I had a Toyota a LONG time ago, back when I didn't need a big truck. Mine was a 85 X-tra cab, 5in. susp., 3in. body lift, 38in. radial super swampers and I regeared it with 5.71s. It was a great truck. |