|
Title: ?'S on how to set timing on a '02 raptor 660.... Post by: apkkfx400 on May 02, 2007, 09:03:19 AM Anybody have any clue on how to set the timing?
Title: Re: ?'S on setting time on a '02 raptor 660.... Post by: xr100racer on May 02, 2007, 05:35:46 PM make sure to spin the crank counter clockwise only and line it up with the "I" mark and not the "H"
also make sure you got the decompression mechanism installed in the cam correctly check out www.raptorforum.com and www.raptortranny.com for alot of helpful advice on the raptor www.bluetraxx.com is good too Title: Re: ?'S on setting time on a '02 raptor 660.... Post by: xr100racer on May 02, 2007, 05:46:27 PM crap, where did nightbreed's post go? that was good stuff
anywho, there are 3 dots on the cam sprocket, 2 will line up parallel with the head, the other will be up. make sure the lobes on the cam are facing down. heres some pics of the cam at TDC.... (http://memimage.cardomain.net/member_images/8/web/740000-740999/740834_246_full.jpg) (http://memimage.cardomain.net/member_images/8/web/740000-740999/740834_247_full.jpg) Title: Re: ?'S on how to set timing on a '02 raptor 660.... Post by: Mrs.Nightbreed on May 02, 2007, 10:37:27 PM I posted off the top of my head without asking Mike to be 100% sure. I was scared maybe I had the Cam lobe direction backwards and I didnt want to be responsible for him being 180 degrees out. I thought I was right until I read it back to myself and reconsidered. I dont usually post in tech without at least asking Mike about it to be 100%. I guess I should have left it :D
Title: Re: ?'S on how to set timing on a '02 raptor 660.... Post by: apkkfx400 on May 03, 2007, 10:21:25 AM Thanks for the quick response, info and pics!!
mark |