|
Title: Blaster ? Post by: crimsontidefan on January 18, 2007, 07:46:34 PM Can you change the bolt pattern on a Blaster from 4x100 to 4x115? Will the spindle from a Banshee fit on the axle? i know that the Banshee is 4x115, that is why I ask. Thanks!
Richard Title: Re: Blaster ? Post by: lil fat rider on January 18, 2007, 07:59:39 PM thats a good question i would like to know that also because i need to do that :ThumbsUp.gif
Title: Re: Blaster ? Post by: otto on January 18, 2007, 08:35:15 PM Yes u can...I did it. I used wheel spacer/adapters that changed the bolt circle to 4/115 and allowed us to run the factory wheels from my yfz. They increased the rear track width by 2 inches (1 inch per side) which made the quad more stable. I got them from Dennis Kirk (www.denniskirk.com). They are part #550450 ($79.95). Another way to do this is change out the wheel hubs with a set that is 4/115. Lonestar racing makes a set of hubs for the blaster for $175 (p/n 550404). They will fit the banshee also so I would guess that the banshee hubs would fit the blaster. If you go with stock banshee hubs I think you will need ones 1991 or newer to get 4/115. Good luck.
Title: Re: Blaster ? Post by: crimsontidefan on January 18, 2007, 09:04:33 PM Yes u can...I did it. I used wheel spacer/adapters that changed the bolt circle to 4/115 and allowed us to run the factory wheels from my yfz. They increased the rear track width by 2 inches (1 inch per side) which made the quad more stable. I got them from Dennis Kirk (www.denniskirk.com). They are part #550450 ($79.95). Another way to do this is change out the wheel hubs with a set that is 4/115. Lonestar racing makes a set of hubs for the blaster for $175 (p/n 550404). They will fit the banshee also so I would guess that the banshee hubs would fit the blaster. If you go with stock banshee hubs I think you will need ones 1991 or newer to get 4/115. Good luck. Thanks Dude! Just bought some hubs off fleabay for 40 bucks. I was going to do the spacers but, saw the hubs and decided to do those instead. Thanks for the info! Richard |