|
Title: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:10:45 PM As most of you know i have done alot of work on my banshee will hear is the hole story!
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:11:16 PM This photo is from when I first bought the banshee a year and a half ago and a few thousand dollars richer! LOL
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:11:52 PM This photo is when I had taken the plastics off for it’s first re-bill, little did I know it would take a year to finest!
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:12:22 PM This photo was taken just after I had taken the lights off!
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:12:52 PM This photo is when I had taken out the engine! At this time I did not know I needed a full engine rebuild! Dam that was a lot of money! But well worth it!
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:13:15 PM Almost to the bear frame!
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:13:44 PM A VIEW OF THE REAR!
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:14:12 PM The Bear frame ready for powder coating! It was a lot of work getting all that paint off!
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:14:47 PM The is a Photo of when I got my engine back from TDR, Tony the shop owner installed 2005 cylinders that where on stock bore and just needed a hone also he put new wiseco STD pistons in it and also put a TDR HIGH PERFORMANCE REBUILT CRANKSHAFT trued to .001" and welded and a Ricky Stator fly wheel and 200 watt stator also the timing plate is at +5.
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:15:26 PM This is a photo of when I got the Banshee all back together! Little did I know I needed new A-arm’s upper and lower! That sucked!
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:15:59 PM Another photo right after I put some more things on the banshee that same day!
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:16:39 PM This is a photo of when I put the $250 UM Nerf Bars on the banshee! They are great!
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:17:07 PM This photo is of when I got my bike back form TDR, Tony dyno tuned it for me! It dyno 50.5 H.P. to the rear wheel’s witch is not to bad for not being ported or stroked!
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:17:41 PM Also he put the T.O.R.S. eliminator kit on the banshee for me.
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:18:13 PM This photo is right after I put the flywheel cover back on and the plastics and got the banshee back to a 100%!
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:18:46 PM Another view of the Banshee at 100%!
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:19:13 PM And Another!
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:21:03 PM So after it was all said and done My Banshee project has taken one year and a few thousand dollars to complete put in the end it was all worth it! The banshee has all new stuff on it and is 10 times better then stock! And I’m loving it!
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: rubicon500kid on June 03, 2006, 11:25:38 PM what happind to the works front shocks y do u got the stock 1 back on
btw it looks nice better then what it was when i wnet and bought ur old 300 LOL also what happind to the 550 u had ? Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:30:20 PM The predator is in the shop! It is taking along time!
The works shocks were to big they where the the flat track shocks for the predator. Thank you me and you are going to ocala soon OK! Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: rubicon500kid on June 03, 2006, 11:33:20 PM ok let me know bro i sold my 400ex but will have a new bike soon 4x4 tho but 750cc lol
ill have a 450r or a banshee in 3-6 months tho (how ever long it takes to sell our house ) Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 03, 2006, 11:37:19 PM do you have a bike now!
Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: rubicon500kid on June 04, 2006, 12:00:12 AM recon and a rancher lol but ill have my new bike soon
Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 04, 2006, 08:52:56 AM Why did you sell the 400ex?
Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: jonnyyellow on June 04, 2006, 12:29:50 PM Why did you sell the 400ex? yeah uhh.. didnt you just get it? lol Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: Miami450R on June 04, 2006, 04:03:02 PM Cuz efren cant hold a bike more than 4 monthgs. lol
Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 04, 2006, 07:03:18 PM yeah he only had my 300ex for like 3 months. lol
Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: rubicon500kid on June 04, 2006, 07:58:07 PM juan i wouldnt be talking LOL
and ill be geting a sport bike later its jsut i realy realy want a brute froce since they have came back Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: klutchbuster400 on June 05, 2006, 01:49:18 PM whats the top speed on that shee, better be 9+ if its 100% done.
Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: cutngrs on June 05, 2006, 02:17:11 PM whats the top speed on that shee, better be 9+ if its 100% done. not with 50 hp it might go 80 mph Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 05, 2006, 02:50:05 PM it might hit the low 90's i have a a 15 tooth front sprocket
Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: cutngrs on June 05, 2006, 08:56:09 PM 90 mph on a banshee will take a at lest a 16 /39 to run mid 90s
Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: 535banshee on June 05, 2006, 09:14:59 PM 90mph our you nuts. you better have more than 50 small hp. my 610 with 19t front and 36t rear in five gear top out went 113mph. you might see 80mph
Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 05, 2006, 09:25:18 PM who know who cares? Not me! ::)
Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: klutchbuster400 on June 05, 2006, 09:33:31 PM whats the top speed on that shee, better be 9+ if its 100% done. not with 50 hp it might go 80 mph My z gps'd in the high 70's with the 18" tires, i didnt try it with the 22's, im not far from 80. Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: cutngrs on June 05, 2006, 09:36:00 PM who know who cares? Not me! ::) you must care yours so proud of the 50 hp you got Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: 535banshee on June 05, 2006, 09:39:23 PM this is a banshee project
[attachment deleted by admin] Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: Smoknbanshee on June 05, 2006, 09:42:50 PM I have been 85 mph in 300 feet....I am proud....I might get to go 115 mph very soon...
Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 05, 2006, 10:19:06 PM who know who cares? Not me! ::) you must care yours so proud of the 50 hp you got yeah my motor is not ported or stroked i think 50 H.P. is great! Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: cutngrs on June 05, 2006, 10:24:03 PM yea will most banshee with a set of pips and a jet kit will make 50 hp if your happy that all that matters
Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: RAD 450r on June 05, 2006, 10:46:58 PM whats the top speed on that shee, better be 9+ if its 100% done. not with 50 hp it might go 80 mph My z gps'd in the high 70's with the 18" tires, i didnt try it with the 22's, im not far from 80. I call BS, Idk, Im sorry I just cant see a z400 going high 70's with just pipe, jet kit, and an air filter...No motor work :-\ Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: klutchbuster400 on June 05, 2006, 10:49:20 PM whats the top speed on that shee, better be 9+ if its 100% done. not with 50 hp it might go 80 mph My z gps'd in the high 70's with the 18" tires, i didnt try it with the 22's, im not far from 80. I call BS, Idk, Im sorry I just cant see a z400 going high 70's with just pipe, jet kit, and an air filter...No motor work :-\ 39 tooth rear sprocket, and +1000 rev box also ;D 78 is what the gps said :) Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: klutchbuster400 on June 05, 2006, 10:52:31 PM oh yeah, i dont have a jet kit either, when we first tried, something electrical went high wire so we didnt even bother messing with the jets after the old problem was fixed.
Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: RAD 450r on June 06, 2006, 10:28:14 PM Ahhhh
Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: 01KX250 on June 07, 2006, 10:59:46 PM What do Banshees make stock??? I thought they made a lot more horsepower then 50 stock?
i got my title for my kx250 and is says 55.6 horsepower from the factory. Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: cutngrs on June 07, 2006, 11:31:38 PM A STOCK BANSHEE MAKES 38 HP
Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 08, 2006, 12:09:32 AM to the rear wheels?
Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: klutchbuster400 on June 08, 2006, 12:57:13 AM to the rear wheels? No, to the front :-\Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: WickedBanshee on June 08, 2006, 11:03:02 AM 90 mph on a banshee will take a at lest a 16 /39 to run mid 90s My banshee had 16/40 on it and it top'd out at 110 mph. My YFZ450 has 15 front and stock rear . It hit 93 mph on gps Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: Moose on June 08, 2006, 11:49:35 AM A STOCK BANSHEE MAKES 38 HP That's a lot when you think of a 450 foreman at only 12hp stock. It goes a lot of places with only 12hp, not very fast though. Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: TurboBanshee_kid on June 08, 2006, 11:22:19 PM Your dum that could be to the engine! >:( Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: klutchbuster400 on June 08, 2006, 11:26:42 PM Your dum that could be to the engine! >:( ( if you really are fat, sorry :P ) Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: Dr.Dirt on June 09, 2006, 02:24:30 AM Your dum that could be to the engine! >:( ( if you really are fat, sorry :P ) No. You have HP that is measured at the crank (Brake Horse Power) and HP that is measured at the wheels. The HP will always experence a loss when transfered through the drivetrain to the wheels. I am not sure how much of a loss there is on lower HP applications around 50HP, but I would guess about 1-2 HP, maybe more, maybe less..One way to reduce HP loss from the crank to the wheels is a lighter flywheel... Ask your dad, I'm sure he knows alot about that stuff. Title: Re: The Banshee project has come to the END!!!!!!!!!!!!! Alots of Pic's Post by: swamp doctor on June 09, 2006, 02:45:07 PM my 4x4 runs 74mph off the show room floor when i change tires no it runs 68 the tires are 29.5outlaws the bike 800 bomb
|