ATV Florida Forum

well me,my dad,and uncle are gogin to start taking apart our buggy.The reason why is to paint it.Also maybe put some field and turf tires on it.Maybe even a couple other things.As for my bike lets say i might get a 2 inch lift.I already have half the money saved up.My uncles bike we just put a 100 watt kc daylighter light on it and its bright.We went mudding last night.Well i have omse pics of the rides but no pics of mudding >:(my dad didnt takeem but i have some pics of them all clean today.Jesse i hope is gonna tyr and postem because the img cod ehting is messed up snd hes gonna try and fix it. ;D

Sweet ;) 

When you gunna get some pics of it???

sheesh reads the post >:(

Cool. Buggys are fun to use, and build. Heres ours. Putting a new motor, tranny, drive shafts, diambond plate deck.. I'll see if I can find some pictures from before we tore it down.
 8)


(http://img.photobucket.com/albums/v648/o4250/buggy003.jpg)

(http://img.photobucket.com/albums/v648/o4250/buggy004.jpg)

(http://img.photobucket.com/albums/v648/o4250/buggy006.jpg)

nice tires my buggy can be seen in my sig

i wish i had a buggy >:(

gettin the 400 to run, then slappin a bumper and hand guards on it, then puttin the mud tires on my stock rims.

sounds cool o btw u have a email ;)

lol ok, ill get crackin, but i have to go to a cousins house again so ill see what i can do.

no prob take ur time im much abloged

(http://x10.putfile.com/3/6316080947.jpg) (http://www.putfile.com)(http://x10.putfile.com/3/6316074834.jpg) (http://www.putfile.com)(http://x10.putfile.com/3/6316072966.jpg) (http://www.putfile.com)(http://x10.putfile.com/3/6316070424.jpg) (http://www.putfile.com)(http://x10.putfile.com/3/6316064638.jpg) (http://www.putfile.com)

nice, did my site work or did you get photobucket to host them?

yes putfile did work

Im working on my 400ex right now this is the new parts its getting 
New clutch
Easy pull clutch lever
White bro R4 exhaust (needs new repacking) 
k&n or white bro filter
Jet kit
Rev box
Dg nerfs
Axel carrier
Axel Bearings 
A-arm Bearings 

Foot peg extenders
A 14 t front and a 16 t front (im getting both so I can figure out which one I like)
Gaskets
Im going to polish and then brush the exhaust to make it look new
Cut the front fenders

My 400 already has a
6 pack rack
msr handle bars
Dg front bumper

sounds like almost everyone has a project ;D

 im gettin razor2's and roll design foot pegs, and probably an fmf bowerbomb header "once i get enough money :("

nice, what other performance mods do you have other then shocks?

i got an fmf riva racing exhaust and header, a modified airbox, and a larger jet, thats about all, besides all the good looking accesories

nioce, but if you already have a header why get a new one?



oh i forgot to add,
a freestyle ramp is in the makin ::)

i got my lift today for $85.Its for a 98-2000 tho but my dad said it would work because the bikes (my uncle has a 2000 300 fourtrax)are like the same also on the way back hes like all you need now is a pipe and jet kit so imma save up for that. ;D

well, my header is extremely discolored, almost brown. it seems the last perso who had that pipe had the carb jetted wrong.

oh, i will only get a new one if this one doesnt clean up well

here are some pictures of the lift kit

(http://x10.putfile.com/3/6416353488.jpg) (http://www.putfile.com)

rear lift
(http://x10.putfile.com/3/6416362281.jpg) (http://www.putfile.com)

front lift
(http://x10.putfile.com/3/6416374987.jpg) (http://www.putfile.com)

Cool, I'm putting a K&N Air filter in mine and the cat today, and I'm looking into getting some nice mudlite rear tires along with a progressive suspension rear shock for mine once I get the $$$.

sweeeet! 8)

bump

uhhhhhhhhhh ???

ok i got the white bros and its a POS so im ordering  my
clutch kit
rev box
sproket
hmf exhaust
k&n filter
axel carrier im going to order the pipe this weekend cuz i dont have all the $$ 

thats a three fiddy? i thought that was a trx400ex

what bike i got a rancher and a recon and a 400ex

ohhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh :K :box.gif :T :H :drive.gif look at all these awsome smileys!!!!!

K&N is in on mine. :D Low-end grunt is better, although the mid-range doesn't seem to have changed. And I have yet to try out the top-end, going to need a good sugarsand road.

i put the lift on my bike and it ade a difference :)

OMG.. it sounds so cool now when i started it up last night. It grumbles at low speed and just rips and roaars at high speed. Fourth still has the speed of fourth but now has the torque of 3rd, 3rd with second, and fifth with fourth. I'm getting huge pickup starting with second, almost a wheelie. The sound is super-cooool!

yeah imma try and get a pipe and jet kit for my old bike i can only seem to find cobra and supertrapp i found a fmf but it was lamost 300$ wiht out the jet kit :o

I think I need to lower the idle though now, sometimes the clutch doesn't disengage and it'll keep going after I stop. lol Not to mention the engine smokes a bit now. :/ Next stop, mud tires.

what type of mud tires where u thinking of geting ?
we are going to put 22inch vamps on  my moms recon or 22inch mudzillas (if we can find them. only place that has them is maxxis them self)

no riva south has them mudzillas its down in the keys its where i got my tires from they had mudzillas in stock on the floor.

I'd like some mud lites but a buddy of ours might be able to get us some cheap dirt devils so I'll look into that too.

still working on the z :-\

Heh, you guys get it fixed yet?

well my project is under way
i just orderd my hmf,jet and air filter
i also already orderd
clutch
sprocket
rev box

toomower im going to order 1 other thing
im also geting a je high comp piston for free its stock bore tho
 im also going to cut my fenders
ill post pics when i get every thing

Got the 22" Mudlites for the Recon in, but now I've gotta work out a list of mods for the rancher. lol. So far I haven't been able to complain about anything on the rancher, has gotten me through everything I wanted to go through great, suspension's awesome, stock tires are aggressive enough without tearing the handlebars out of my hands. And best of all I went upto the rack in water and still nothing's gotten into the airbox. I'd like to get a winch but, I was able to tow everyone out in 1st easy as cake. Even towed my dad's AC500 out of the mud once.

lol, we got the mud tires on the recon and it's good. K&N on the rancher improved the top-end but it still feels like something holds the bike back in the high-end. Even my dad on his 500 smokes me. I'm only able to keep up to about 3rd gear with extremely high shift-points. After that though it feels like fourth gear is fastest possible since fifth is geared like 1:0.73 making it more of an overdrive. It actually slows down a bit when I shift into fifth making it a struggle gear hunting at high speed on trails. Sucks. :( Any ideas 400exkid? It's getting annoying as crud and all I can think is to get a better pipe. It just feels way underpowered at high speed.

z's fixed  ;D
workin on mx'n her out ;) , but dont worry, ill be switchin the dirt devils over to the stock rims so that i'll have the mud tires and the track tires ready for whenever >:D

um i doono mine was stock for a lil bit and it never did that and after that when i hade my 27 on it i didnt go that fast well yes i did but lol get a hmf,snorkel and jet kit and it will be so much better i would also recomend 27x10x12 vamps cuz they r realy realy light and u can ask any 1 that rides with me and they will tell u it turn them like nothing  if u dont want vamps then go with like a 26 in tire i personaly dont like mudlites that much but thats just me

ill be geting a BF 750 soon
my mom says i have to keep it stock but on friday im buying stuff for it already lol  ( what she dosnt know wont hurt her lol ) after taht it will be running stock for a few months when i save up sum casht to buy a HL clutch kit (200$) and snorkel kit and 29.5 outlaws

29.5in Outlaws will rule. I dunno, I just can't keep up with them. They hit 55mph while I'm stuck behind on the trail at like 45.

ohh that sux but u do a hole lot better then them in the mud right ? i cant wait to get a brute after i break it in ill take it out to hollylands

Hell no compared to the AC500. 2wd/4wd and full diff-lock on 26" Mudlite XTRS. Which means to make up I'll be getting some 28"+ Tires for christmas. Shall be awesome.

 i dont think a rancher would turn a 28 inch tire
i wanted to go with 28 mudlite's but no one thought it would turn  it so i went with vamps

well im not sure but dont you have to jet it because arent you getting more air flow with the new filer?

Not that much more air I wouldn't think. Might try that though. And personally I think it could turn them, if I could get it to the point where I needed to start out in 1st, I'd be on 30s. 2nd - 3rd gear is enough power to get going right now, and in 1st gear it pulls my dad's quad out of the mud easy as pie. Just would be slow.. although it already is slow so who cares. Might try to save up for a CRF150F to ride fast.

the pipe ill hopefully be getting ;D


http://www.rockymountainatv.com/productDetail.do?prodFamilyId=4639&navTitle=Exhaust&webCatId=18&pageLinkUri=&vehicleType=&webTypeId=57&navType=type


http://www.rockymountainatv.com/viewLargerImage.do?prodImage=F/FMF_POWERLINE_SILENCER.JPG

well in thick mud i dont think it would but in water downed stuff it would but hey if it dose pull um in thick stuff that would be a cool rancher lol

also if u wnat to find more stuff out on the rancher and what mods ppl use go to high lifter alot of good info on there

That pipe is purdy, how much is it?

sorry i fixed the link

I've looked around and decided my next mod will be a Warn 424. Seeing my buddy on his AC500 doing wheelies and burnouts where I can't is frustrating. Plus it should give me a little better top end.

OH ok

FUTURE MODS - Honda Rancher 4x4 w/ K&N:
Snorkel & Jet Kit - Next mods
Lift kit
Front Bumper & 2500lb Winch
26" Vamps - Christmas time.

Z is almost done!
well a temporary done lol. All i really need is a rear shock, and some handguards and shes done. Long travel shocks, a-aarms and an axle can all come way down the road, on a 450 ::)

well since my little headlights on ym handle bars dont light up enough to fit my needs imma copy my uncle and put a kc daylighter on my bars hopefully ill get a disk brake conversion kit and a fmf pipe!!!!!!!!!!

Did the snorkel today, now gotta figure out how I'm going to pay for some vamps.

sit on the corner of the street and play music!!.i put my light on my bars and it is BRIGHT!!!