|
Title: Bolt patterns? Post by: Southern_Pride on February 01, 2006, 06:58:59 PM Anybody know em for any of the big 4x4 machines with 12 inch wheels?
I'm gonna try to put 28's on my blaster when I get it going again. I dont ride it fast and there's lots of mud around here, so why not try it. Title: Re: Bolt patterns? Post by: dynodon on February 01, 2006, 07:02:38 PM I don`t know of the bolt patterns for sure, But you might be wasting your time, & money. 28`s are gonna be alot for a blaster to handle !!!!!
Title: Re: Bolt patterns? Post by: tony pitts on February 01, 2006, 07:10:57 PM the blaster has its own bolt pattern not like the rest of the yamaha it has a 4/100 rear bolt pattern im almost positive nothing else has this pattern you would have to change your rear hubs to get what you are looking for and your gearng drastically
Title: Re: Bolt patterns? Post by: Southern_Pride on February 01, 2006, 07:20:36 PM Ill have to look into the hubs. Didnt know that. I know the gearing would have to be changed. But as it is now it will pick the front end up in every gear with 22 inch tires on the back. But the rest of yamaha has a 4/100 pattern? Maybe I can switch the hubs off something else on. Is the front of the blaster 4/100 or some oddball thing as well.
Title: Re: Bolt patterns? Post by: tony pitts on February 01, 2006, 07:25:14 PM the rest of the yamahas have a 4/115 on the rear and 4/156 up front the blaster also has 4/156 on the front
Title: Re: Bolt patterns? Post by: Southern_Pride on February 01, 2006, 07:31:15 PM My buddy has a beartracker and Im gonna see if the hubs off it will fit on. If so Ill have to find me some and some 12 inch wheels. Thanx.
Title: Re: Bolt patterns? Post by: yunt2ride on February 02, 2006, 08:51:12 AM Why not put it in the forsale section and try to trade for a utility. You will be better off in the long run.
Title: Re: Bolt patterns? Post by: Southern_Pride on February 02, 2006, 05:50:58 PM Dont really want a utility. That and this thing is pretty freakin ragged. Barely worth 500 bux and its an 89. Plus a blaster is light as crap. Utility are heavy. I'm hoping this will float with me on it.
Title: Re: Bolt patterns? Post by: Truegrit on February 12, 2006, 09:10:22 PM I have seen a Raptor w/ 28 outlaws on the rear. But it had a sprocket that had to be 18" in dia. But it would spin the heck out of those tires.
Title: Re: Bolt patterns? Post by: greenmachine on February 14, 2006, 09:24:36 PM If you want to figure out any 4 bolt pattern, just measure across the center of the rim to the wheel stud centers. Take that measurement in inches & multiply it by 25.8mm. This answer will usually be within 2 mm, usually rounding up. Example: a 4/110 bolt pattern measures 4.25 inches across center rim to stud centers, 4.25in x 25.8mm= 109.65mm, hence 4/110(4 bolt/110mm). I think 3 bolt patterns are a bit different, not sure.
|