Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
ATV Florida Forum
>
General
>
Tech Corner
>
z400 sputtering problem..
Pages: [
1
]
Go Down
« previous
next »
Print
Author
Topic: z400 sputtering problem.. (Read 2425 times)
svtbolt04
Supreme Member
Offline
Location: SoFla
Posts: 2266
z400 sputtering problem..
«
on:
July 25, 2005, 05:10:04 PM »
Well, It started as soon as I pulled the cap off to fill it back up with some gas. Maybe some water got in the gas through the vent hole, but I am not sure what else it could be. I took off the seat and looked at the air filter and it was fine. Infact, the bike ran perfect all day yesterday durring practice. I pull out the bike to go on a little ride, fill it up, then it starts to sputter in every gear about quarter throttle al the way up to WOT.
What should I do? Drain the gas? I dont know what to do. I also checked the CDI because it was over reving very easy in neutral.
Any help would be great.
Logged
823 for life!
Black wheels, plastics, some shiny chrome pieces. Left over dirt from last year, handle bars.
TRX450R_Racer
Retired Racer
Supreme Member
Offline
Location: West Palm Beach
Posts: 4171
**** Frank **** **FF&J Racing**
Re: z400 sputtering problem..
«
Reply #1 on:
July 25, 2005, 07:15:14 PM »
Do you still have your parking brake? I'm not sure about your quad but I have seen some Yamahas that have a switch associated with either the clutch or parking brake that sticks. Check up by both the levers on the bars for a switch with a plunger that goes in and out. That might be your problem.
Logged
Member of South East Florida Trail Riders
Life's to short, wear a helmet.
Dress for the crash, not for the ride.
Ripped off by Brandon George.
Terry Arick
Newbie
Offline
Location: Fl
Posts: 16
Re: z400 sputtering problem..
«
Reply #2 on:
July 25, 2005, 08:08:28 PM »
There is a hole in the left side of your cylinder that drains the water from around the spark plug. If that is clogged then the Z will misfire because water is trapped around the spark plug. Take high pressure air to it if you have access, or take a small wire and run it into the hole and see if water runs out. Clean your spark plug cap when done. Don't pull the plug until you clean out the drain or else the water will run into the combustion chamber.
Try it
,
Logged
FTR HS SS 181
FTR QS A 181
GNCC SS 181
svtbolt04
Supreme Member
Offline
Location: SoFla
Posts: 2266
Re: z400 sputtering problem..
«
Reply #3 on:
July 25, 2005, 08:13:52 PM »
Thanks, I let it sit for about a half an hour and then Before I started it, I drained the bowl one more time. Started right up and I went in my backyard track and it was running flawless once again.
Thanks to both of you for answering.
Logged
823 for life!
Black wheels, plastics, some shiny chrome pieces. Left over dirt from last year, handle bars.
Pages: [
1
]
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Classifieds
-----------------------------
=> For Sale / Wanted
-----------------------------
General
-----------------------------
=> Open Discussion
=> Group Rides & Events
=> Where to Ride?
=> Photo Gallery & Videos
=> Tech Corner
=> Racing Scene
=> Product and Services Reviews
=> ATV Activist
Loading...