***JUST A HEADS UP ON 06YFZ'S***

[svtbolt04]

Check your axle spikes were they lock into the sprocket there starting to chip off.I have 15 hours on mine.

Mine did the same, but its just the outside. Dont worry. Unless you feel TONS of slippage, dont go shelling the money out for a after market one just yet.

[Hondarider22]

just checked those bolts on my yfz today and they were tight, tryed to tighten them a little but wouldnt budge

[MOTOCROSS MAVERICK]

just checked those bolts on my yfz today and they were tight, tryed to tighten them a little but wouldnt budge

i would suggest you take them out and lock tite them just to be safe! i did!

[Hondarider22]

just checked those bolts on my yfz today and they were tight, tryed to tighten them a little but wouldnt budge

i would suggest you take them out and lock tite them just to be safe! i did!

were yours loose when u took it apart?

[novadave]

After reading this post yesterday i called my friend who just bought an 06 last week. Today we took his apart and both bolts were loose. I just wanted to say good looking out guys.

[yfz#78]

 

[attachment deleted by admin]

[#26YFZ]

what exactly is the point of that post?

[Quadracer]

thanks for the post i will get right on that!

[hudson guy]

Looking for a 2000 hounda foreman 450 4x4 book.

[kiegan_mc]

i have a leak on my YFZ450 and all my antifreeze keeps graining out i saw the hole wheres its coming out its right under the water pump idk what to do.

[Chillinthemost]

You need to replace the impeller bearings and seals. Maybe even the impeller shaft if is is worn.