Home ATV Florida Forum ATV Florida Where to Ride? ATV Florida Links Advertise


Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 
   Home   Help Search Calendar Login Register  
Pages: 1 [2] 3   Go Down
  Print  
Author Topic: Store bought Snorkels  (Read 28693 times)
JOE3504x4
Senior Member
****
Offline Offline

Location: Brandon, FL

Posts: 317



View Profile

Ignore
« Reply #25 on: November 02, 2008, 09:20:22 PM »

looks great.... I picked up a couple tubes of this stuff called GOOP at Advanced and re sealed all the fittings inside and out, I think its pretty water tight. Im gonna run a hose up the snorkels and see if i have any more leaks in a couple of days.... The only big job is gonna be taking the casing off and sealing it. How big of a bead do i need to make around the seal?
Logged

Ideal Automotive
8507 Adamo Drive Tampa
www.idealauto.com
Mine *09 BRUTE FORCE 750efi, Full snorkel, pink primary/red secondary and EPI weights, 2" lift, 28" Silverbacks and some other stuff...
Her's * 4x4 Wolverine 350 - Stock
Kid's * Bayou 250 - Stock
jrpro130
Supreme Member
*****
Offline Offline

Posts: 1215



View Profile

Ignore
« Reply #26 on: November 02, 2008, 09:28:11 PM »

make a pretty thin bead around the cvt.  Just make sure it's not too much because the excess will hang out and when you clean the bike or peel the rtv silicon it will take some of the stuff from the inside when you pull the outside.  A little bit goes a long way

So how are your snorkels done? spa hose w/ pvc and rubber connectors?
Logged

08 Brute 750
Snorkel/Radiator Relocated, 29.5's, Muzzy, PCIII, UNI, and a few other custom mods
JOE3504x4
Senior Member
****
Offline Offline

Location: Brandon, FL

Posts: 317



View Profile

Ignore
« Reply #27 on: November 02, 2008, 09:34:00 PM »

Theres really no pvc anywhere but the actual snorkels. Everything is spa hose to rubber connectors.    The only place i might put pvc is coming right out of the exhaust side. If this goop stuff doesnt make a good enough seal i might need a slight bend to take some pressure off the spa hose. Hopefully this works cuz im kinda sick of this project already Bang Head
Logged

Ideal Automotive
8507 Adamo Drive Tampa
www.idealauto.com
Mine *09 BRUTE FORCE 750efi, Full snorkel, pink primary/red secondary and EPI weights, 2" lift, 28" Silverbacks and some other stuff...
Her's * 4x4 Wolverine 350 - Stock
Kid's * Bayou 250 - Stock
jrpro130
Supreme Member
*****
Offline Offline

Posts: 1215



View Profile

Ignore
« Reply #28 on: November 03, 2008, 05:28:07 PM »

Theres really no pvc anywhere but the actual snorkels. Everything is spa hose to rubber connectors.    The only place i might put pvc is coming right out of the exhaust side. If this goop stuff doesnt make a good enough seal i might need a slight bend to take some pressure off the spa hose. Hopefully this works cuz im kinda sick of this project already Bang Head

so all your connections are like mine? spa hose -> rubber -> pvc? NO SPA HOSE SHOULD CONNECT DIRECTLY TO PVC...it will leak.  I don't understand why your having problems...

I did PVC all the way out of the cvt intake on the KQ.  Then for the exhaust I did about 12" of PVC coming out of the trans, then flex hose all the way up to PVC in the front.  I tried to use a little spa hose as possible.

If you take pics I'll tell you where your problems are
Logged

08 Brute 750
Snorkel/Radiator Relocated, 29.5's, Muzzy, PCIII, UNI, and a few other custom mods
JOE3504x4
Senior Member
****
Offline Offline

Location: Brandon, FL

Posts: 317



View Profile

Ignore
« Reply #29 on: November 03, 2008, 05:31:31 PM »

ok pics coming tomorrow
Logged

Ideal Automotive
8507 Adamo Drive Tampa
www.idealauto.com
Mine *09 BRUTE FORCE 750efi, Full snorkel, pink primary/red secondary and EPI weights, 2" lift, 28" Silverbacks and some other stuff...
Her's * 4x4 Wolverine 350 - Stock
Kid's * Bayou 250 - Stock
crom A zone
Supreme Member
*****
Offline Offline

Location: coral springs, FL

Posts: 2414


you all wish you where me


View Profile

Ignore
« Reply #30 on: November 03, 2008, 05:53:31 PM »

his problems coming   coming from same place mine was. The cover for tranny  put silcone around that and it dont leak   and the rear   of the tranny  case. silcone  in that and it wont leak.  Yes ricky it is rubber to spa hose to  pvc.  once he seals up those  2 spots   it will be 100%    if i reacal   correctly you did the snorkles on my bike and they leaked   first time(as i letmy bike float away in holylands canle) and i went back through  and when i was done with the tranny they   do not leak till this day
Logged

2008 brute force 750

30inch itp mulite xxl on ss108s
rad reloated and mimb snorkles
gold/red epi clutch springs
hl springs and extream 2inch lift
asmart82
Senior Member
****
Offline Offline

Posts: 386



View Profile

Ignore
« Reply #31 on: November 03, 2008, 06:05:25 PM »

If you didn't silicone the drain plug, I would highly recommend it.  It took me about two months of head scratching before I figured that one out.
Logged
jrpro130
Supreme Member
*****
Offline Offline

Posts: 1215



View Profile

Ignore
« Reply #32 on: November 03, 2008, 06:22:13 PM »

his problems coming   coming from same place mine was. The cover for tranny  put silcone around that and it dont leak   and the rear   of the tranny  case. silcone  in that and it wont leak.  Yes ricky it is rubber to spa hose to  pvc.  once he seals up those  2 spots   it will be 100%    if i reacal   correctly you did the snorkles on my bike and they leaked   first time(as i letmy bike float away in holylands canle) and i went back through  and when i was done with the tranny they   do not leak till this day

your bike doesn't count lol, you rigged up 90 percent of the stuff on it, and I think the only helping I did with the snorkels was drilling the little hole on the cap of the intake...and supervising, holding the flashlight if you know what i mean...

I did kevs 2 brutes, my bike, and the KQ and they are all leak free the first time except the KQ, but i figured it out now.  you can't expect it to be leak free if you only spend 2hrs on it...

i'm not saying you did a bad job, just don't understand why it's leaking.  the cvt cover shouldn't be leaking that bad...if it leaks at all it's only a little bit since it's plastic against plastic, even w/o a gasket it won't leak much.

did you guys check the drain plug, it comes out easy on the kq...jayson lost his 2x already just riding around just something to think about.

Logged

08 Brute 750
Snorkel/Radiator Relocated, 29.5's, Muzzy, PCIII, UNI, and a few other custom mods
crom A zone
Supreme Member
*****
Offline Offline

Location: coral springs, FL

Posts: 2414


you all wish you where me


View Profile

Ignore
« Reply #33 on: November 03, 2008, 06:38:56 PM »

i never looked at that  i thought it was screw in like mine  my bikes not riged  its just not   the way it should be but the beast still runs jus fine
Logged

2008 brute force 750

30inch itp mulite xxl on ss108s
rad reloated and mimb snorkles
gold/red epi clutch springs
hl springs and extream 2inch lift
JOE3504x4
Senior Member
****
Offline Offline

Location: Brandon, FL

Posts: 317



View Profile

Ignore
« Reply #34 on: November 03, 2008, 10:47:28 PM »

if i silicone the drain plug how am i supposed to drain it if it does get some water in?
Logged

Ideal Automotive
8507 Adamo Drive Tampa
www.idealauto.com
Mine *09 BRUTE FORCE 750efi, Full snorkel, pink primary/red secondary and EPI weights, 2" lift, 28" Silverbacks and some other stuff...
Her's * 4x4 Wolverine 350 - Stock
Kid's * Bayou 250 - Stock
JOE3504x4
Senior Member
****
Offline Offline

Location: Brandon, FL

Posts: 317



View Profile

Ignore
« Reply #35 on: November 03, 2008, 10:52:56 PM »

pics so far


* snorkel1.jpg (66.15 KB, 406x406 - viewed 190 times.)

* intake assy.jpg (78.43 KB, 406x406 - viewed 179 times.)
Logged

Ideal Automotive
8507 Adamo Drive Tampa
www.idealauto.com
Mine *09 BRUTE FORCE 750efi, Full snorkel, pink primary/red secondary and EPI weights, 2" lift, 28" Silverbacks and some other stuff...
Her's * 4x4 Wolverine 350 - Stock
Kid's * Bayou 250 - Stock
JOE3504x4
Senior Member
****
Offline Offline

Location: Brandon, FL

Posts: 317



View Profile

Ignore
« Reply #36 on: November 03, 2008, 10:54:37 PM »

more


* cvt exhaust.jpg (76.74 KB, 406x406 - viewed 176 times.)

* intake inner.jpg (56.4 KB, 406x406 - viewed 192 times.)
Logged

Ideal Automotive
8507 Adamo Drive Tampa
www.idealauto.com
Mine *09 BRUTE FORCE 750efi, Full snorkel, pink primary/red secondary and EPI weights, 2" lift, 28" Silverbacks and some other stuff...
Her's * 4x4 Wolverine 350 - Stock
Kid's * Bayou 250 - Stock
JOE3504x4
Senior Member
****
Offline Offline

Location: Brandon, FL

Posts: 317



View Profile

Ignore
« Reply #37 on: November 03, 2008, 10:55:48 PM »

and the top 


* snorkel top 2.jpg (74.05 KB, 406x406 - viewed 194 times.)

* snorkel top.jpg (65.01 KB, 406x406 - viewed 176 times.)
Logged

Ideal Automotive
8507 Adamo Drive Tampa
www.idealauto.com
Mine *09 BRUTE FORCE 750efi, Full snorkel, pink primary/red secondary and EPI weights, 2" lift, 28" Silverbacks and some other stuff...
Her's * 4x4 Wolverine 350 - Stock
Kid's * Bayou 250 - Stock
JOE3504x4
Senior Member
****
Offline Offline

Location: Brandon, FL

Posts: 317



View Profile

Ignore
« Reply #38 on: November 03, 2008, 10:58:26 PM »

pics aren't so great leme know if you see any problems...... I definitely appreciate all the help!
Logged

Ideal Automotive
8507 Adamo Drive Tampa
www.idealauto.com
Mine *09 BRUTE FORCE 750efi, Full snorkel, pink primary/red secondary and EPI weights, 2" lift, 28" Silverbacks and some other stuff...
Her's * 4x4 Wolverine 350 - Stock
Kid's * Bayou 250 - Stock
crom A zone
Supreme Member
*****
Offline Offline

Location: coral springs, FL

Posts: 2414


you all wish you where me


View Profile

Ignore
« Reply #39 on: November 04, 2008, 08:42:52 AM »

looks like you got it all  sealed. up   silicone  is easy to get off   if u need to drain it. looks like the top ened  up coming out good.  good job joe finishing it up
Logged

2008 brute force 750

30inch itp mulite xxl on ss108s
rad reloated and mimb snorkles
gold/red epi clutch springs
hl springs and extream 2inch lift
asmart82
Senior Member
****
Offline Offline

Posts: 386



View Profile

Ignore
« Reply #40 on: November 04, 2008, 08:54:14 AM »

if i silicone the drain plug how am i supposed to drain it if it does get some water in?


You use the pliers that come with the tool pack, grab a hold of it and it pulls out pretty easy.  I use the pliers to put it in and pull it out as my fingers don't fit up high enough to grab it.

I also always carry extra silicone with me so if I do need to pull the plug, I can just resilicone it before putting it back on.  RVT comes off pretty easy.
« Last Edit: November 04, 2008, 08:56:04 AM by asmart82 » Logged
JOE3504x4
Senior Member
****
Offline Offline

Location: Brandon, FL

Posts: 317



View Profile

Ignore
« Reply #41 on: November 04, 2008, 09:23:29 AM »

Right! ok Im thinkin ill try that last. once im sure everything is dried ill go ahead and pressure test the system before i put the bike back together. thats prolly gonna be wednesday night..
Logged

Ideal Automotive
8507 Adamo Drive Tampa
www.idealauto.com
Mine *09 BRUTE FORCE 750efi, Full snorkel, pink primary/red secondary and EPI weights, 2" lift, 28" Silverbacks and some other stuff...
Her's * 4x4 Wolverine 350 - Stock
Kid's * Bayou 250 - Stock
jrpro130
Supreme Member
*****
Offline Offline

Posts: 1215



View Profile

Ignore
« Reply #42 on: November 04, 2008, 06:54:14 PM »

Looks good but I can see where your problems are, right where it comes out of the CVT the stock boot where it connects to the other boot doesn't look sealed all the way.  I put a 2.5" PVC there and sealed it all up with a NICE BIG home depot clamp.  Thats the only way that i got it to not leak
Logged

08 Brute 750
Snorkel/Radiator Relocated, 29.5's, Muzzy, PCIII, UNI, and a few other custom mods
JOE3504x4
Senior Member
****
Offline Offline

Location: Brandon, FL

Posts: 317



View Profile

Ignore
« Reply #43 on: November 04, 2008, 09:37:24 PM »

are you talking about the intake or the exhaust? I did put about 6lbs of silicone on both those connections cuz i was worried about them. those pics were taken before the silicone dried so it looks kinda sloppy. i figured id wait till everything dried up before i stated trimming
Logged

Ideal Automotive
8507 Adamo Drive Tampa
www.idealauto.com
Mine *09 BRUTE FORCE 750efi, Full snorkel, pink primary/red secondary and EPI weights, 2" lift, 28" Silverbacks and some other stuff...
Her's * 4x4 Wolverine 350 - Stock
Kid's * Bayou 250 - Stock
crom A zone
Supreme Member
*****
Offline Offline

Location: coral springs, FL

Posts: 2414


you all wish you where me


View Profile

Ignore
« Reply #44 on: November 05, 2008, 10:07:57 AM »

he was talking bout  intake  but with silcone on it you are fine
Logged

2008 brute force 750

30inch itp mulite xxl on ss108s
rad reloated and mimb snorkles
gold/red epi clutch springs
hl springs and extream 2inch lift
JOE3504x4
Senior Member
****
Offline Offline

Location: Brandon, FL

Posts: 317



View Profile

Ignore
« Reply #45 on: November 05, 2008, 11:15:40 AM »

we shall see. if this doesnt work im buyin a waverunner!!!
Logged

Ideal Automotive
8507 Adamo Drive Tampa
www.idealauto.com
Mine *09 BRUTE FORCE 750efi, Full snorkel, pink primary/red secondary and EPI weights, 2" lift, 28" Silverbacks and some other stuff...
Her's * 4x4 Wolverine 350 - Stock
Kid's * Bayou 250 - Stock
crom A zone
Supreme Member
*****
Offline Offline

Location: coral springs, FL

Posts: 2414


you all wish you where me


View Profile

Ignore
« Reply #46 on: November 05, 2008, 03:28:26 PM »

no u dont have to do that  u just come back to my crib   and i get it water proof for you
Logged

2008 brute force 750

30inch itp mulite xxl on ss108s
rad reloated and mimb snorkles
gold/red epi clutch springs
hl springs and extream 2inch lift
JOE3504x4
Senior Member
****
Offline Offline

Location: Brandon, FL

Posts: 317



View Profile

Ignore
« Reply #47 on: November 05, 2008, 03:44:01 PM »

hey matt your dads in front of me right now he says" get your a__ back to work"
Logged

Ideal Automotive
8507 Adamo Drive Tampa
www.idealauto.com
Mine *09 BRUTE FORCE 750efi, Full snorkel, pink primary/red secondary and EPI weights, 2" lift, 28" Silverbacks and some other stuff...
Her's * 4x4 Wolverine 350 - Stock
Kid's * Bayou 250 - Stock
JOE3504x4
Senior Member
****
Offline Offline

Location: Brandon, FL

Posts: 317



View Profile

Ignore
« Reply #48 on: November 05, 2008, 03:48:30 PM »


Small world!
Logged

Ideal Automotive
8507 Adamo Drive Tampa
www.idealauto.com
Mine *09 BRUTE FORCE 750efi, Full snorkel, pink primary/red secondary and EPI weights, 2" lift, 28" Silverbacks and some other stuff...
Her's * 4x4 Wolverine 350 - Stock
Kid's * Bayou 250 - Stock
crom A zone
Supreme Member
*****
Offline Offline

Location: coral springs, FL

Posts: 2414


you all wish you where me


View Profile

Ignore
« Reply #49 on: November 05, 2008, 05:48:49 PM »

lol  he said he  goes there alot
Logged

2008 brute force 750

30inch itp mulite xxl on ss108s
rad reloated and mimb snorkles
gold/red epi clutch springs
hl springs and extream 2inch lift
Pages: 1 [2] 3   Go Up
  Print  
 
Jump to:  

Other Florida sites of interest: www.PinballShark.com

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!