what kind of clutch?

[k-town quad boy #5]

my clutch started slippping and i need a new one that wont slipp for a yfz450 what are some good ones that are reliable

[RTR_380/450R]

Factory! When all else fails, go with a stock one!

[01ZX12R]

OEM, Do not waste your time or money on an aftermarket it will not last. When you replace it remember to replace the springs as well.

[k-town quad boy #5]

alright thanks. but what about stiffer springs will that help it?

[01ZX12R]

yes they will. Spring pressure makes a big differance.

[k-town quad boy #5]

so should i get stronger springs and oem clutch?

[01ZX12R]

yes, that would be the best thing to do. Keep in mind that going with a stiffer spring is going to make the clutch a little harder to pull in, but at the same time it will keep more pressure on the clutch and keep it from slipping.

[535banshee]

stock yfz's go threw clutchs real quick. i have been selling a  lock up and cover for them and no more clutch problems. it also puts more power to the ground
http://www.directdrivecnc.net/YFZ450.html

[01ZX12R]

stock yfz's go threw clutchs real quick. i have been selling a  lock up and cover for them and no more clutch problems. it also puts more power to the ground
http://www.directdrivecnc.net/YFZ450.html

Thats the best way to eliminate clutch slippage. That is the only thing I use on my street ZX12's and Busa's. It takes alittle power away from the engine because of the centrifical weight but at the same time it is transferring the power to the ground much quicker.
 you have a pm