|
klutchbuster400
|
 |
« on: August 19, 2006, 10:28:04 AM » |
|
Hey, going to palmetto motorsports today to get a bottom end front sporcket, Any one know what the stock size for the front sprocket on a 03 z400
|
|
|
|
|
Logged
|
|
|
|
|
lawn_man mx
|
|
« Reply #1 on: August 19, 2006, 10:56:08 AM » |
|
i think is 14 ! go to magic racing.com click on tech z400  |
|
|
|
|
Logged
|
05 yfz houser hiper elka rpm alba 03 cr125 05 f350 fx4 braaauuuupppp !!!! ftr +30B #58
|
|
|
|
klutchbuster400
|
|
« Reply #2 on: August 19, 2006, 11:02:51 AM » |
|
thanks alot rafaeal, I wouldnt have to get a different size chain right.
|
|
|
|
|
Logged
|
|
|
|
|
lawn_man mx
|
|
« Reply #3 on: August 19, 2006, 11:11:51 AM » |
|
you should be ok ! going up 1tooth ?
|
|
|
|
|
Logged
|
05 yfz houser hiper elka rpm alba 03 cr125 05 f350 fx4 braaauuuupppp !!!! ftr +30B #58
|
|
|
|
klutchbuster400
|
|
« Reply #4 on: August 19, 2006, 11:58:25 AM » |
|
you should be ok ! going up 1tooth ?
down  Need some more power out of the corners  |
|
|
|
|
Logged
|
|
|
|
brokenbackt12
Junior Member
 Offline
Location: coral springs
Posts: 30
Finally! ATVFlorida.com is here!
|
|
« Reply #5 on: August 20, 2006, 09:09:05 AM » |
|
go to z400central 13/41 is the combo to have. no you do not have to change chain legnth. the stock 03 gears are 14/40 and the chain is 96 links.
|
|
|
|
|
Logged
|
|
|
|
|
klutchbuster400
|
|
« Reply #6 on: August 20, 2006, 10:16:47 AM » |
|
go to z400central 13/41 is the combo to have. no you do not have to change chain legnth. the stock 03 gears are 14/40 and the chain is 96 links.
Thanks man, I was looking for the right combo, I was thinking 13/ 42, but thta migth be too much, 13/41 sounds abotu rigth. |
|
|
|
|
Logged
|
|
|
|
|
tony pitts
|
|
« Reply #7 on: August 20, 2006, 11:43:57 PM » |
|
how do you know what sprocket to run, without knowing what size tires he has. if your running stock tires . and stock gearing you should have 14 40 gearing wich gives you a 286 gear if you go to a 13 41 you will have 315 gear which is a drastic change unless your running 24 inch tires on the back. try 14 41 and you should be happy.
|
|
|
|
|
Logged
|
|
|
|
|
Fox17
|
|
« Reply #8 on: August 21, 2006, 11:16:12 AM » |
|
how would i gear a yfz 450 with 18s on the back with stock gearing? i want more low end. a lot more.
|
|
|
|
|
Logged
|
|
|
|
|
svtbolt04
|
|
« Reply #9 on: August 21, 2006, 11:31:36 AM » |
|
go down a tooth in the front
|
|
|
|
|
Logged
|
823 for life!
Black wheels, plastics, some shiny chrome pieces. Left over dirt from last year, handle bars.
|
|
|
|
Fox17
|
|
« Reply #10 on: August 21, 2006, 11:41:19 AM » |
|
the stock chain will fit right? well i may just get new sprockets and chain. we'll see.
|
|
|
|
|
Logged
|
|
|
|
|
svtbolt04
|
|
« Reply #11 on: August 21, 2006, 11:45:30 AM » |
|
With one tooth, you dont need to worry about length.
|
|
|
|
|
Logged
|
823 for life!
Black wheels, plastics, some shiny chrome pieces. Left over dirt from last year, handle bars.
|
|
|
|
klutchbuster400
|
|
« Reply #12 on: August 21, 2006, 03:35:45 PM » |
|
how do you know what sprocket to run, without knowing what size tires he has. if your running stock tires . and stock gearing you should have 14 40 gearing wich gives you a 286 gear if you go to a 13 41 you will have 315 gear which is a drastic change unless your running 24 inch tires on the back. try 14 41 and you should be happy.
Well I need more bottom end for the track, Never really topend for it. I run 18's btw. I had a 14 41 set up once on my z400, I didnt really like it, I felt VERY sluggish. |
|
|
|
|
Logged
|
|
|
|
brokenbackt12
Junior Member
Offline
Location: coral springs
Posts: 30
Finally! ATVFlorida.com is here!
|
|
« Reply #13 on: August 21, 2006, 04:22:43 PM » |
|
i'm on 20 x 11 x 9. i ride trails with some soft sand.
|
|
|
|
|
Logged
|
|
|
|
|
Fox17
|
|
« Reply #14 on: August 21, 2006, 04:22:51 PM » |
|
thanks svtbolt04. ill go get one.
|
|
|
|
|
Logged
|
|
|
|
|
k.p.
|
|
« Reply #15 on: August 21, 2006, 04:25:24 PM » |
|
yeah well i bought a chain/sproket kid for my warrior and they sent me yfz sprokets..so yeah dont order to big
|
|
|
|
|
Logged
|
|
|
|
|
Fox17
|
|
« Reply #16 on: August 21, 2006, 04:26:09 PM » |
|
what size and do you still have them?
|
|
|
|
|
Logged
|
|
|
|
|
k.p.
|
|
« Reply #17 on: August 21, 2006, 04:31:49 PM » |
|
well i do but i need to turn them in so i can get the right sprokets for my quad but ifyou want a cheap sproket kit go here www.magicracing.com they have the cheapest stuff |
|
|
|
|
Logged
|
|
|
|
|
Fox17
|
|
« Reply #18 on: August 21, 2006, 04:32:11 PM » |
|
ok thanks.
|
|
|
|
|
Logged
|
|
|
|
|
tony pitts
|
|
« Reply #19 on: August 21, 2006, 08:17:04 PM » |
|
how do you know what sprocket to run, without knowing what size tires he has. if your running stock tires . and stock gearing you should have 14 40 gearing wich gives you a 286 gear if you go to a 13 41 you will have 315 gear which is a drastic change unless your running 24 inch tires on the back. try 14 41 and you should be happy.
Well I need more bottom end for the track, Never really topend for it. I run 18's btw. I had a 14 41 set up once on my z400, I didnt really like it, I felt VERY sluggish. If you are running 18s and your quad is sluggish with 14 41 gearing, then you need to check you motor and carb. My wife's bike is running that gearing with 20x11x9 Razr2 and it will spin them very easy. Here is a pic of her pulling the holeshot on her Z400 at one of the FTR Quad Scrambles last year.  |
|
|
|
|
Logged
|
|
|
|
|
LTR450 994
|
|
« Reply #20 on: August 21, 2006, 09:41:33 PM » |
|
how do you know what sprocket to run, without knowing what size tires he has. if your running stock tires . and stock gearing you should have 14 40 gearing wich gives you a 286 gear if you go to a 13 41 you will have 315 gear which is a drastic change unless your running 24 inch tires on the back. try 14 41 and you should be happy.
Well I need more bottom end for the track, Never really topend for it. I run 18's btw. I had a 14 41 set up once on my z400, I didnt really like it, I felt VERY sluggish. If you are running 18s and your quad is sluggish with 14 41 gearing, then you need to check you motor and carb. My wife's bike is running that gearing with 20x11x9 Razr2 and it will spin them very easy. Here is a pic of her pulling the holeshot on her Z400 at one of the FTR Quad Scrambles last year. rider skill has alot to do with also not just the bike. |
|
|
|
|
Logged
|
|
|
|
|
klutchbuster400
|
|
« Reply #21 on: August 21, 2006, 09:54:24 PM » |
|
I know how to ride my bike, and even then its not hard to punch it  |
|
|
|
|
Logged
|
|
|
|
|
tony pitts
|
|
« Reply #22 on: August 21, 2006, 10:02:39 PM » |
|
how do you know what sprocket to run, without knowing what size tires he has. if your running stock tires . and stock gearing you should have 14 40 gearing wich gives you a 286 gear if you go to a 13 41 you will have 315 gear which is a drastic change unless your running 24 inch tires on the back. try 14 41 and you should be happy.
Well I need more bottom end for the track, Never really topend for it. I run 18's btw. I had a 14 41 set up once on my z400, I didnt really like it, I felt VERY sluggish. that was the time she ever raced. I have changed every sprocket size there is believe me there is something wrong with your zuki and buy the way she now runs 14 39 wiyh a 440 kit and it pulls even harder. If you are running 18s and your quad is sluggish with 14 41 gearing, then you need to check you motor and carb. My wife's bike is running that gearing with 20x11x9 Razr2 and it will spin them very easy. Here is a pic of her pulling the holeshot on her Z400 at one of the FTR Quad Scrambles last year. rider skill has alot to do with also not just the bike. |
|
|
|
|
Logged
|
|
|
|
|
klutchbuster400
|
|
« Reply #23 on: August 21, 2006, 10:32:18 PM » |
|
how do you know what sprocket to run, without knowing what size tires he has. if your running stock tires . and stock gearing you should have 14 40 gearing wich gives you a 286 gear if you go to a 13 41 you will have 315 gear which is a drastic change unless your running 24 inch tires on the back. try 14 41 and you should be happy.
Well I need more bottom end for the track, Never really topend for it. I run 18's btw. I had a 14 41 set up once on my z400, I didnt really like it, I felt VERY sluggish. that was the time she ever raced. I have changed every sprocket size there is believe me there is something wrong with your zuki and buy the way she now runs 14 39 wiyh a 440 kit and it pulls even harder. If you are running 18s and your quad is sluggish with 14 41 gearing, then you need to check you motor and carb. My wife's bike is running that gearing with 20x11x9 Razr2 and it will spin them very easy. Here is a pic of her pulling the holeshot on her Z400 at one of the FTR Quad Scrambles last year. rider skill has alot to do with also not just the bike. Oh crap my bad, I read that wrong, I thought you said she ran 14/ 39, which is my old set up haha. I mean tmy bike felt sluggish with the 39 rear, I would go 41 in the rear, but a front sprocket is much cheaper and Funds are low  |
|
|
|
|
Logged
|
|
|
|
|
tony pitts
|
|
« Reply #24 on: August 21, 2006, 10:53:16 PM » |
|
I understand but changing the front sprocket 1 tooth is like changing 3 and a half teeth on the rear you will get lot of rev out of the bottom but less speed overall not to mention over reving your quad at top speed.I have done a lot of gear changing I have three quads yfz450 trail and mx, my sons trx 513 mx, and my wifes 440 zuki.
|
|
|
|
|
Logged
|
|
|
|
|
