Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
ATV Florida Forum
>
General
>
Tech Corner
>
ATV Submersible??
Pages: [
1
]
Go Down
« previous
next »
Print
Author
Topic: ATV Submersible?? (Read 3724 times)
Nick350R
Junior Member
Offline
Location: Florida
Posts: 75
ATV Submersible??
«
on:
June 07, 2006, 02:02:48 PM »
For my ATV (2006 Honda Rancher 4X4 ES) no-one makes a Snorkel Kit.
Wanted to know on how to go about on making a Snorkel Kit by myself?
If anyone has this ATV or close, can u tell me what the exact supplies u had purchased for your Snorkel Kit and where and how much did it cost u?? Approx. how much time it took u to put it together?
Thanks in advance!
Logged
rubicon500kid
Supreme Member
Offline
Location: homestead
Posts: 3185
Re: ATV Submersible??
«
Reply #1 on:
June 07, 2006, 02:50:05 PM »
illl send u pics and how too do it on aol
also you got to rember even with a snorkel it still wont be submersible
Logged
DROP & DESTROY
87 s10 2/3 soon to be bagged
85 honda 110 atc(22" bearclaws & snorkeld)
01 kx 125 (pc pipe,tag bar's,pro racing rear rim,some lil other stuff
I hate it when you microwave something, then you start eating it, and it's cold in the middle...makes me wanna punch a
Da_Mtg_Man
extraordinaire
Supreme Member
Offline
Location: far far away
Posts: 7463
Re: ATV Submersible??
«
Reply #2 on:
June 09, 2006, 08:03:52 AM »
Oh yes they are, Just run your vent tubes up the snorkle, Just make sure you stay on the gas, As soon as you let off then water will come in through your exhaust, If you stay on it then you'll be fine. I've been up to my shoulders with nothing more than the top of the snorkle sticking out of the water.It is a good idea to get some dielectric grease and grease all fittings, Even the spark plug
Logged
FLORIDA MUD RIDER
Southern4x4
Supreme Member
Offline
Location: Homestead
Posts: 2491
Turn off them blinkers to save blinker fluid.
Re: ATV Submersible??
«
Reply #3 on:
June 09, 2006, 10:49:29 AM »
Quote from: 400exkid on June 07, 2006, 02:50:05 PM
illl send u pics and how too do it on aol
also you got to rember even with a snorkel it still wont be submersible
just get a snorkle for the rider too.
Logged
[><]Southern by the grace of God[><]
Nick350R
Junior Member
Offline
Location: Florida
Posts: 75
Re: ATV Submersible??
«
Reply #4 on:
June 13, 2006, 10:42:01 AM »
I have an idea, tell what u think!
Take the whole air box out that is connected to the carborator.
Run PVC Pipe coming out from the carborator hole (Ruber housing).
Run the pipe to the outside of the atv.
Run it up toward to the front racks.
Extend it up into the air of the atv.
Put a K&N Air Filter Cone at the ending (the top) of the PVC Pipe for filtered air (now since there is no air box).
What do u guys think!
If some one has done this sort of, can u post some pictures of it (doesn't have to be the atv)
Thanks
Logged
Nick350R
Junior Member
Offline
Location: Florida
Posts: 75
Re: ATV Submersible??
«
Reply #5 on:
June 13, 2006, 10:42:59 AM »
(doesn't have to be the atv)
Doesn't have to be the same atv**************
Logged
MachineDog
Supreme Member
Offline
Location: West Loxahatchee
Posts: 971
Ride Red!
Re: ATV Submersible??
«
Reply #6 on:
June 14, 2006, 03:51:12 AM »
Quote from: MudRedneck on June 13, 2006, 10:42:01 AM
I have an idea, tell what u think!
Take the whole air box out that is connected to the carborator.
Run PVC Pipe coming out from the carborator hole (Ruber housing).
Run the pipe to the outside of the atv.
Run it up toward to the front racks.
Extend it up into the air of the atv.
Put a K&N Air Filter Cone at the ending (the top) of the PVC Pipe for filtered air (now since there is no air box).
What do u guys think!
If some one has done this sort of, can u post some pictures of it (doesn't have to be the atv)
Thanks
Bad idea. The filter won't be protected. We just made one for my bro and it came out awesome, spray canned it black with clear coat. Anyway, you'll want to take out the little tube that comes out of the front on the air box. Then go to a hardware store, find a bit of rubber flex-tube that will fit around that tube. Then cut it, stick the flex-tube around it, silicone. Then take the flex-tube and run it somehow to the front end of the quad where you should be able to figure out the same way of getting it to fit a PVC pipe. Also, remember to get some heat-proof tape or some piece of metal to tape to the flex-tube and keep it off the engine. The flex-tube *will* melt through and leak if it touches the engine.
Logged
http://img284.imageshack.us/img284/4291/p517000123ek.jpg
06 Rancher 350 4x4 - K&N, 1.5" Snorkel, 26" Mudbugs.
Spot Reserved for Big Bore.
http://www.flickr.com/photos/machinedogtag/
- Click to see our pics.
Nick350R
Junior Member
Offline
Location: Florida
Posts: 75
Re: ATV Submersible??
«
Reply #7 on:
June 20, 2006, 08:46:56 PM »
How about this:
1.5" spa/pool hose. Where it goes to air box, I used a rubber reducer with clamps that goes from 1.5" to 2". Put a 2" 45 degree elbow on the end with a straight peice of 2" comming out of that. The 2" pipe slides right in airbox's factory rubber boot with clamp. For the riser I used 2" PVC connected to hose with rubber coupling and clamps. It was Cheap, easy, quick, no leaks, no rejeting, and is removable. Making the entire snorkel out of PVC or ABS is a lot harder cause you gotta figure out how to make all the angels work together.
What do u guys think?
Logged
Bleedsblue
Senior Member
Offline
Location: South Florida
Posts: 376
Re: ATV Submersible??
«
Reply #8 on:
June 30, 2006, 11:14:14 AM »
That will work just fine. Both my belt case snorkels use shop vac hose from home depot which is 2" ID.
Definitely go through your ATV and look for any vent tubes that need to be extended and extend them to your snorkel. Some ATV's have vents on the carb, electric fan if you have one and front and rear differentials. Then as mentioned go through all your electrical connections and put dielectric grease in them. I've heard the Honda's are notorious for allowing water in through the pull start. You may want to look into how to seal that up as well.
If you do all of the above you can complete submerge your ATV. Of course I wouldn't recommend trying to drive through any lakes. I've had most of my ATV's completely underwater save the snorkels.
Bill
Logged
2008 Ford F-250, 8" Fabtech Lift, 38" Kumho MTs
2007 Yamaha Rhino 660, 27" Mudbugs
MachineDog
Supreme Member
Offline
Location: West Loxahatchee
Posts: 971
Ride Red!
Re: ATV Submersible??
«
Reply #9 on:
June 30, 2006, 11:47:42 AM »
Only thing about the vaccum tube is it could collapse, they're only designed for about 3hp of sucking power.. not 15. Not to mention the water will be pushing on it, try some heavier duty tube.
Logged
http://img284.imageshack.us/img284/4291/p517000123ek.jpg
06 Rancher 350 4x4 - K&N, 1.5" Snorkel, 26" Mudbugs.
Spot Reserved for Big Bore.
http://www.flickr.com/photos/machinedogtag/
- Click to see our pics.
Bleedsblue
Senior Member
Offline
Location: South Florida
Posts: 376
Re: ATV Submersible??
«
Reply #10 on:
June 30, 2006, 12:19:37 PM »
The pool spa hose or shop vac tubing? The shop vac tubing would not collapse under the engines power. The only way it could happen is if it got so hot that it became soft. This has been used on my ATVs for years and others and never had a single problem with collapsing.
Bill
Logged
2008 Ford F-250, 8" Fabtech Lift, 38" Kumho MTs
2007 Yamaha Rhino 660, 27" Mudbugs
Cory1020
Senior Member
Offline
Location: North Fort Myers
Posts: 436
Re: ATV Submersible??
«
Reply #11 on:
July 03, 2006, 08:17:44 AM »
friend of mine has a trx 300. He ran 2inch pvc all the way to the front. He sealed the stock intake(at the airbox) and put a new hole going out the side. The pipe runs next to his left leg. Either that or just use the stock intake hole.
Logged
99 F-150 4x4
8" lift on 35x13.5 cooper sst
02 Rubicon
06 Rancher 4x4
01 Rancher 4x4
98 Fourtrax 2x4
06 Raptor 700
05 Rincon
Nick350R
Junior Member
Offline
Location: Florida
Posts: 75
Re: ATV Submersible??
«
Reply #12 on:
July 07, 2006, 07:14:21 PM »
Can u send me some pictures of it, or post them.
Thanks
Logged
Pages: [
1
]
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Classifieds
-----------------------------
=> For Sale / Wanted
-----------------------------
General
-----------------------------
=> Open Discussion
=> Group Rides & Events
=> Where to Ride?
=> Photo Gallery & Videos
=> Tech Corner
=> Racing Scene
=> Product and Services Reviews
=> ATV Activist
Loading...