Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
ATV Florida Forum
>
General
>
Tech Corner
>
Need Help!! (kodiak 400 '06)
Pages: [
1
]
Go Down
« previous
next »
Print
Author
Topic: Need Help!! (kodiak 400 '06) (Read 2920 times)
Big Kev
Junior Member
Offline
Location: Venice, FL
Posts: 32
Owner of the KodiCRAP.
Need Help!! (kodiak 400 '06)
«
on:
March 26, 2006, 03:06:43 PM »
I went riding today in some water pits, and my back racks where under for a bit (engine still going) and got pulled out...Now it seems like it won't go out of first gear (kodiak 06 is ultramatic belt drive)..I emptied the belt drive drain and it still is running slow,I can reverse fine and it when going in drive it is topping like 12 miles per hour...any soloutions? I guess it would be tranny??
Logged
http://home.comcast.net/~kevindmb88/KodiCrap1.jpg
06' Kodiak 400 4x4.
-Overfenders
-26" 589's
-K&N air filter
-2500 Warn Winch
-Snorkeled
2006YFZ450
Supreme Member
Offline
Location: Clearwater
Posts: 1858
YFZ 450
Re: Need Help!! (kodiak 400 '06)
«
Reply #1 on:
March 26, 2006, 09:52:09 PM »
Did you check the Oil???
Check your Air Filter and make sure it's clean
You might have to change the Oil & Oil filter if water/mud got in thier.
Logged
'06 YFZ 450
'03 F150 SVT
http://www.sponsorhouse.com/members/2006YFZ450
qt314nfla
Guest
Re: Need Help!! (kodiak 400 '06)
«
Reply #2 on:
March 26, 2006, 09:57:21 PM »
No might in the oil. Darn good chance you got water in it. If it's milky you'll have to do several changes before it's back to the color it should be.
Also check your front and rear differentials. Probably have to change them also. Check the air box. Check transmission oil. Also might need to change the belt. That it's slipping when you get the speed up.
Logged
Big Kev
Junior Member
Offline
Location: Venice, FL
Posts: 32
Owner of the KodiCRAP.
Re: Need Help!! (kodiak 400 '06)
«
Reply #3 on:
March 26, 2006, 10:10:14 PM »
I did get a keep getting water in the belt drive, if i leave plug open will it possibly air out?? Checked oil and it was normal but going to change tommrow, never hurts.
Logged
http://home.comcast.net/~kevindmb88/KodiCrap1.jpg
06' Kodiak 400 4x4.
-Overfenders
-26" 589's
-K&N air filter
-2500 Warn Winch
-Snorkeled
qt314nfla
Guest
Re: Need Help!! (kodiak 400 '06)
«
Reply #4 on:
March 26, 2006, 10:22:56 PM »
Not likely to dry out. You need a new belt. Also if you're going to play in water like that you may consider snorkeling it.
Logged
MuddFreak77
Supreme Member
Offline
Location: Fort Myers, FL
Posts: 1006
I found out who my friends are
Re: Need Help!! (kodiak 400 '06)
«
Reply #5 on:
March 26, 2006, 10:50:19 PM »
At least snorkel the front and rear diff's, Tranny/Belt housing up to the handle bars. if you want to snorkel the air intake also there is a good chance you will need to rejet the carb.
I snorkeled my rincon and I'm now running lean and its causing a hot condition. I need to install a fatter jet, cause after snorkeling its basically an open intake. More air same fuel is lean, less air same fuel is rich mixture.
Freakk
Logged
Never argue with an Idiot. They drag you down to their level, and then beat you with experience!
'07 Suzuki King Quad
3k Warn Winch
GPS
2001 F-250 4X4 Diesel, 6 way hand
Big Kev
Junior Member
Offline
Location: Venice, FL
Posts: 32
Owner of the KodiCRAP.
Re: Need Help!! (kodiak 400 '06)
«
Reply #6 on:
March 27, 2006, 01:52:22 AM »
Ahh, I just hope I can get it fixed for April 7-9 C & R motorsports event.
Logged
http://home.comcast.net/~kevindmb88/KodiCrap1.jpg
06' Kodiak 400 4x4.
-Overfenders
-26" 589's
-K&N air filter
-2500 Warn Winch
-Snorkeled
Joedirt
Supreme Member
Offline
Location: Somewhere between raising hell and amazing grace
Posts: 1705
I am a FloridaMud Rider
Re: Need Help!! (kodiak 400 '06)
«
Reply #7 on:
March 27, 2006, 11:32:28 AM »
Sounds like you got the belt soaked , it will dry out ..pull the plug and let it idle , revving it up in neutral , this "should"get the water out of the belt housing , that sounds like why you could not go fast..as a safe measure you may want to open the belt housing up and visually check the belt for chunks missing , then of course check your oil , if it milky start draining it and replacing it and the filter , then do it again until it runs clear. Let me know if I can help any further or if it helps at all.
Logged
2005 Vinson 4x4
2003 Big Bear 4x4
2001 Prarie 4x4
1987 Dirty Dakota Mud truck on 35 inch Boggers
Big Kev
Junior Member
Offline
Location: Venice, FL
Posts: 32
Owner of the KodiCRAP.
Re: Need Help!! (kodiak 400 '06)
«
Reply #8 on:
March 27, 2006, 11:48:32 AM »
I'll try that. I checked the oil and it looked clean..but going to change anyways.
Logged
http://home.comcast.net/~kevindmb88/KodiCrap1.jpg
06' Kodiak 400 4x4.
-Overfenders
-26" 589's
-K&N air filter
-2500 Warn Winch
-Snorkeled
Pages: [
1
]
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Classifieds
-----------------------------
=> For Sale / Wanted
-----------------------------
General
-----------------------------
=> Open Discussion
=> Group Rides & Events
=> Where to Ride?
=> Photo Gallery & Videos
=> Tech Corner
=> Racing Scene
=> Product and Services Reviews
=> ATV Activist
Loading...